Page 1
TTM FiltrX C250/C450 Large system filter that removes magnetite Installation, operating and maintenance instructions magne- titfälla med partikelfilter Also be aware that the magnet may interfere with electronic equipment and pacemakers. Strong magnetic Can affect Risk of field pacemaker/ICD pinching TTM Energiprodukter AB Slöjdaregatan 1, SE-393 66 Kalmar, Sweden | Tel.
Page 2
33 kg (mm) c/c min. 500 mm Installation TTM FiltrX is connected with TTM Connection hoses on the Return flow system’s return conduit. Two bifurcations with ball valves with minimum dimensions DN20 and a spacing of at least 500 mm are DN20 - 25 installed on the bottom side of the conduit.
Page 3
Magnetite and dirt separator TTM FiltrX C250/C450 SE EN Installation, operating and maintenance instructions 2024-05 Maintenance / filter replacement The filter must be replaced when the pressure meter shows 1 bar higher than the system pressure. To guarantee good function, however, the filter must be inspected visually at least once per month.
Page 4
The butyl hose is steel-covered and rated for pressures up to 10 bar. The connection hose is used to connect the TTM FiltrX to the HVAC system with a brass traveling nut (DN25) with internal threads at both ends.
Need help?
Do you have a question about the FiltrX C250 and is the answer not in the manual?
Questions and answers