ROWAN ELECTRIC APPLIANCE JD-3A Product Manual

Hide thumbs

page of 34

/ 34
Bookmarks

Quick Links

Download this manual

PRODUCT MANUAL

LP GAS GRILL

Model No.: JD-4A/B/C/D/E

Model No.: JD-3A/B/C/D/E

Model No.: JD-5A/B/C/D/E

Model No.: JD-6A/B/C/D/E

NOTE:The pictures are for reference only, the actual product shall prevail.

Scan the QR code to watch the installation video.

Thank you for purchasing this product! If you have any question about the product

such as missing parts, damaged products, product assembling, operation, etc., please

Need help?

Do you have a question about the JD-3A and is the answer not in the manual?

Questions and answers

Summary of Contents for ROWAN ELECTRIC APPLIANCE JD-3A

Page 1 PRODUCT MANUAL LP GAS GRILL Model No.: JD-4A/B/C/D/E Model No.: JD-3A/B/C/D/E Model No.: JD-5A/B/C/D/E Model No.: JD-6A/B/C/D/E NOTE:The pictures are for reference only, the actual product shall prevail. Scan the QR code to watch the installation video. Thank you for purchasing this product! If you have any question about the product such as missing parts, damaged products, product assembling, operation, etc., please...
Page 2 TABLE OF CONTENTS Safety Information ...........................3 Package Contents ...........................5 Preparation ............................6 Assembly Instructions ........................7 Operation Instructions ........................23 Care and Maintenance ........................28 Troubleshooting ..........................31 Assembler/Installer: This manual contains important information that is necessary for the proper assembly and safe use of this appliance. Read and follow all warnings and instructions before assembling and using this appliance.
Page 3 SAFETY INFORMATION Thank you for purchasing this product! If you have any question about the product such as missing parts, damaged products, product assembling, operation, etc., please contact us via our customer service phone: 213-4467172 or 661-4358826. DANGER • Do not use in an explosive atmosphere. Keep grill area clear and free from combustible CALIFORNIA PROPOSITION 65 mbustion of such fuels contain chemicals, including Benzene, known to the State of California to cause cancer, birth defects or...
Page 4 SAFETY INFORMATION WARNING Do not place the grill under overhead combustible construction or awnings. The minimum clearance between the side/back of the unit and any other construction is 40 inches (1016.0 mm). NOTE: The installation must conform with local codes or, in the absence of local codes, with either the National Fuel Gas Code, ANSI Z223.1/ NFPA54, Natural Gasand Propane Installation Code, CSAB149.1, or Propane Storage and...
Page 5 P A C K A G E C O N T E N T S NOTE: Please read the picture and product list of the package contents carefully before assembly. Scan the QR code on the cover to watch the installation video. CSA Label batch number Description...
Page 6 PREPARATION Before start assembling product, make sure all parts are present. Compare parts and hardwares with the list on the package contents page. If any part is missing or damaged, do not attempt to assemble the product. Contact customer service for replacement parts. Estimated Assembly Time: 50 minutes with 2 people.
Page 7 ASSEMBLY INSTRUCTIONS B.Installation of Left/Right Frame Note: There is a L/R sticker on the left/right frame (ensure that the right frame is assembled on the side near the nesting hole of the baseboard). AA (M6X12) 2PCS Left side AA M6X12 2PCS Right side AA (M6X12) 2PCS AA M6X12 2PCS...
Page 8 ASSEMBLY INSTRUCTIONS C.Installation of Backboard AA (M6X12) 4PCS AA M6X12 4PCS Install the backboard (9) between the left and right frames with 4 AA screws. D.Installation of Casters with (without) Brake For braking & relaxation HH WRENCH 1PC Install the casters with brake (12) and the casters without brake (14) under the bottom of the baseboard and adjust the height of the casters with the HH wrench.
Page 9 ASSEMBLY INSTRUCTIONS Note: For easy movement, be sure to install the same type of casters on the same side of the base- board. E.Installation of Beam AA (M6X12) 2PCS magnet down Right side Left side Back side AA M6X12 4PCS Place the baseboard in the direction shown in Picture 6 (back side forward), and install the beam (8) between the two frames with 4 AA screws.
Page 10 ASSEMBLY INSTRUCTIONS Place the baseboard in the direction shown in Picture 7 (front side forward). Put 2 CC screws in the corresponding positions on the beam, and put 2 DD screws in the corresponding positions on the baseboard and tighten the DD screws for use when installing doors later. G.Remove the Protective Accessories from the Grill Body The grill body (1) is a pre-assembled part, among which 33, 34 and 35 are protective accessories.
Page 11 ASSEMBLY INSTRUCTIONS H.Installation of Grill Body M6X12 M6X12 Note: Before installing the grill body, it is necessary to pass the ignition needle (31) and the hose (32) through the right frame. AA M6X12 4PCS Install the grill body on the two frames with 4 AA screws. Note: Before installing the grill body, it is necessary to pass the ignition needle (31) and the hose (32) through the right frame.
Page 12 10.1 M4X10 4PCS GG M4 4PCS M4X10 M4X10 Install the door handles (4) to the doors with 4 GG spacers and 4 EE screws. J.Pre-installation of Screws on the Grill Body M6X12 Note: Do not tighten the screws for following installation of the left table and the right burner table.
Page 13 ASSEMBLY INSTRUCTIONS K.Installation of Left Table and Left Front Panel M6X12 AA M6X12 2PCS Preattach 2 AA screws to the left front panel (3) (do not tighten), then assemble the left table (2) and left front panel together and tighten the screws. 12.1 Pre-attach the screw and do...
Page 14 12.2 M6X12 2PCS M6X12 2PCS AA M6X12 2PCS Fix the left front panel to the left side of the grill body with 2 AA screws. 12.3 M6X12 2PCS AA M6X12 2PCS Fix the left table to the left side of the grill body with 2 AA screws screwing from inside the grill body.After adjustment, tighten the 4 pre-attached AA screws on the left side of the grill body to completely fix the left table and the left front panel together with the grill body.
Page 15 L.Installation of Right Burner Table and Right Front Panel M6X12 2PCS AA M6X12 2PCS Preattach 2 AA screws to the right front panel (21) (do not tighten), then assemble the right burner table (20) and the right front panel together and tighten the screws. 13.1 Pre-attach the screw and do not tighten...
Page 16 13.2 M6X12 AA M6X12 2PCS 2PCS Fix the right burner table to the right side of the grill body with 2 AA screws screwing from inside the grill body. After adjustment, tighten the 4 pre-attached AA screws on the right side of the grill body to complete- ly fix the right burner table and the right front panel together with the grill body.
Page 17 N.Installation of Side Burner M4X10 2PCS Note: Insert the side burner (24) into the middle of the right Note: Put the tail of burner table from the the side burner over top down the valve of the hose before fixing BB M4X12 2PCS BB M4X10 2PCS Insert the side burner (24) into the middle of the right burner table from the top down, put...
Page 18 P.Installation of Bottle Opener and Fire Rod M4X10 2PCS Note: Fix the fire rod and the bottle opener together. FF M4X10 2PCS Fix the top of the bottle opener to the left side of the grill body with 1 FF screw, then insert 1 FF screw through the fire rod and fix the fire rod to the bottom of the bottle opener.
Page 19 R.Secure Gas Tank Note: Tighten the butterfly screw in the direction shown in the picture to secure the tank. Clockwise tighten the butterfly screw on the back of the baseboard to secure the gas tank in place. S.Installation of Lid Handle and Temperature Dial M6X12 2PCS Note: Remove the 2 AA screws and 2 adiabatic spacers (29) pre- installed on the lid handle (28) before installing the hlid handle.
Page 20 T.Installation of Fire Spreader Note: Ensure that each fire spreader be placed in the specified slot. Install the fire spreader (18) in place, noting that each fire spreader must be placed in the specified slot. U.Installation of Cooking Grill and Burner Rack Install the cooking grills (17) on the specified step.
Page 21 V.Installation of Insulated Rack Insert the insulated rack (16) into the specified holes on both sides of the grill body. Insert the insulated rack (16) into the specified holes on both sides of the grill body. W.Installation of Oil Receiver Box Insert the oil receiver box (25) along the guide rail of the oil receiver tray (30).
Page 22 X.Installation of Battery Insert the AA 1.5V battery in the direction as shown in the picture. Screw the ignition button on the front of the grill body out, then insert the battery into the round hole and screw the ignition button in. Note: The "+"...
Page 23 OPERATION INSTRUCTIONS CHECKING FOR LEAKS gs on the threaded valve of the LP gas tank, gas hose and regulator valve for leaks with a water and soap solution. • Always perform leak test prior to lighting the grill. • Do not smoke while testing for a leak. •...
Page 24 The propane gas supply cylinder to be used must be constructed and marked in accordance with the Standard of Canada, CAN/CSA-B339, Cylinders, Spheres and Tubes for Transportation of Dangerous Goods; and Commission, as applicable; and provided with a liste Use only 20-pound cylinders (height: 18.11 inches, tank diameter: 9.84 inches, foot diameter: 8.03 inches) equipped with a cylinder connection device compatible with the connection for outdoor cooking appliances.
Page 25 OPERATION INSTRUCTIONS Note: Other cylinders may be acceptable with this appliance if they are compatible with the nesting hole and retention means of the appliance. Refer to Step Q of Assembly Instructions for correcting the cylinder to the cylinder holder connection. WARNING ALL INSTRUCTIONS AND SAFEGUARDS ON THIS PAGE MUST BE FOLLOWED TO PREVENT FIRE, DAMAGE AND/OR INJURY.
Page 26 OPERATION INSTRUCTIONS Lighting The Grill Remove all hangings or plastic straps, if present. Before you cook on your new gas grill, it is important to clean your grill with heat. To do this, operate the grill for approximately 15 minutes with the lid closed and the control knob in the highest position.
Page 27 OPERATION INSTRUCTIONS LIGHTING THE GRILL WITH THE FIRE ROD 1. Open the lid. 2. Insert the fire rod. 3. Light the fire rod. 4. Immediately place the lit rod through the spaces in the cooking grills near the ports of the burner between the fire spreaders as shown.
Page 28 CARE AND MAINTENANCE Cooking Grills The best time to ‘burn-off’ the cooking grills is after every use (approx. 15 minutes). The grill is already hot from cooking thus requiring less fuel to obtain necessary temperature for ‘burn-off’. To " burn off" or heat clean your grill, turn the burners to highest position and run for 15 minutes with the lid closed.
Page 29 CARE AND MAINTENANCE Removing The Burner Assembly - Make sure the grill is cool Insulated Rack 1. Make sure all control knobs are in the “OFF” position, the gas supply valve is closed, and the Cooking Grill gas hose is disconnected from the gas supply. 2.Remove the ignition button, remove the AA Fire Spreader battery (1.5V) (K) out, then screw the ignition...
Page 30 CARE AND MAINTENANCE Re-installing the Burner Assembly 1. Ensure that gas value orifices inside the grill body are correctly positioned inside burner inlet (venturi) as shown in the right pictures below. 2. The use of a flashlight may be necessary to ensure the correct position. 3.
Page 31 TROUBLESHOOTING If you have any question regarding the product, please call customer service at 213-4467172 or 661- 4358826. PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION 1. Clean the ignition electrode. 1. The ignition electrode may be The burner does covered with grease or residue. not light by using 2.
Page 32 TROUBLESHOOTING PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION The burner will not The rod not reach 1. Use the fire rod correctly as instructed in burners (when holding the rod light with the fire rod. LIGHTING THE GRILL WITH THE FIRE ROD with hand).
Page 33 661-4358826 (8:30am - 5:30pm P.S.T.) SE REQUIERE PRUEBA DE COMPRA CON FECHA PARA SERVICIO BAJO GARANTÍ Address: ROWAN ELECTRIC APPLIANCE LLC 750S. Valley View Avenue, San Bernardino, CA 92408 Phone: 213-4467172 or 661-4358826 Install the grill bo Note: Before ins (31) and the hos I.Installation of...

This manual is also suitable for:

Jd-3b Jd-3c Jd-3d Jd-3e Jd-4a Jd-4b ... Show all