Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Nac Manuals
  4. Digital Camera
  5. Hi-Motion II
  6. Quick manual

Nac Hi-Motion II Quick Manual

Hide thumbs

Advertisement

Quick Links

Download this manual
Hi-MotionII Preliminary Quick Guide
2012/2/1

Advertisement

loading
Need help?

Need help?

Do you have a question about the Hi-Motion II and is the answer not in the manual?

Questions and answers

Related Manuals for Nac Hi-Motion II

Summary of Contents for Nac Hi-Motion II

  • Page 1 Hi-MotionII Preliminary Quick Guide 2012/2/1...
  • Page 2 Table of Contents Quick Overview of Specification Setup and Connection CCU Quick Guide Format Selection Description of Monitor Information Caption Quick Guide for OCP Operation Quick Guide for Slow Controller Operation Recording Speed and its Correlated Time Table Description of Camera Head Menu 10 Trouble Shooting 11 Attention when SHED-HDX.
  • Page 3 Quick Overview of Specification Camera Head Image Sensor 3x CMOS, 2/3-inch Optical System Effective picture elements 1920x1080 Lens Mount B4 Mount Operation temperature -15 to +40 degrees C Storage temperature -30 to +60 degrees C Memory 96GB (32GB x 3ch) Frame rate 24 to 1000 fps, 1fps step Recording time...
  • Page 4 Setup and Connections OB Style  ...
  • Page 5 2.2 Stand Alone Style  ...
  • Page 6 CCU Quick Guide Rear Panel AC IN AC100V/110V/117V/220V/240V ±10% For Optical Fiber Connection MIC OUT MIC Direct Output from the MIC Input of Camera SLOW-CTRL For Slow Controller Connection TALLY IN For Tally Signal Input INTERCOM For Intercom Signal Connection RET IN For Return Signal Connection via max.
  • Page 7 Front Panel POWER MAIN Power switch of CCU. It initializes together when the switch of the Camera head is HEAD Power switch of Camera Head. CABLE OPTICAL LEVEL It shows the optical communication status of camera cable.   1.OK In a good condition  ...
  • Page 8 Format Selection 1080I59, 720P59, 1080P59, 1080I50, 720P50, 1080P50 are selectable as the image signal output. *At the time of January 2012, 1080P59 and 1080P50 are not capable It is necessary to change both settings on the Camera Head and the CCU. The Camera has to be changed first and the CCU as the second.
  • Page 9 720P Capture Mode is available when either 720P59 or 720P50 is selected. The sensitivity of 720P gains twice as much as the regular 1080 Capture mode Removing the Magnification Optics Unscrew the lever that is attached on the Mount Ring of the Magnification Optics Loosen the screws for Air Filter Cover Unscrew the screws on the Mount Ring Cover of the Camera Body and remove the Cover Turn the lever that is attached on the Mount Ring of the Camera Body counter-clock wise...
  • Page 10 How to change Capture Format Call the Camera Head Menu on VF and change CAPTURE SIZE of RECORDING to 720 in MENU(2/2) Reboot the Camera Notice Follow the steps in reverse for re-mounting the Magnification Optics Optical part of the Magnification Optics has to be treated carefully with soft cloth not to have contaminations or possible damage.
  • Page 11 Description of Monitor Information Caption Picture Monitor 1 of CCU rear panel, Picture Monitor 2 on the rear panel of CCU, and Monitor Output, VF Output of the Camera will have Information Caption for each Camera Status overlaid 1. Block Status 3.
  • Page 12 Block Status Displays the status of the selected Block STOP Playback Stop VIEW Live Image In Recording PLAY In Playback Playback in Loop (LOOP only available by Camera or J-PAD control LOOP Displays Available Recording Time or Remaining Playback Time depending on the selected Block status VIEW, REC Displays Available Recording Time(Sec) on the selected Block Displays Remaining Playback Time (Sec) from the current position to the end of...
  • Page 13 PLAY Recorded Block Nothing displayed LOCK Empty Block 11 Alert： CAUTION SENSOR TEMP! 12 Digital GAIN Displays Gain settings that are set on OCP when OCP is connected to CCU or Camera Head. 13 AWB Ch Displays Live image Displays Playback image  ...
  • Page 14 Quick Guide for OCP Operation The following Camera Head Menu are selectable by buttons on OCP. Please press ABB button on OCP and perform Auto Black Balance when the following settings are changed. FRAME RATE 24, 30, 50, 60, 100, 120, 150, 180, 240, 300, 400, 500, 600, 800, 1000 SENSITIVITY 3dB, 0dB, +3dB, +6dB COLOR TEMP...
  • Page 15 Quick Guide for Slow Controller Operation 7.1 How to Switch between LIVE and REPLAY The operator of the Slow Controller operates by looking at PM2 output of the CCU. At this time, select either LIVE or REPLAY image for the overlaid image of PM2 output. How to change LIVE and REPLAY on PM2 output.
  • Page 16 4 Blocks and started with the 3 Block, it ends at the 2 Block after one round . In LOOP Mode, it jumps to the next Block Recordings every time REC button is pressed, and it continues until STOP button is pressed. When in CONTINUES or LOOP Mode, the Blocks that are being in LOCK and PLAY will not be overwritten.
  • Page 17   Check button of the CUE MODE SEL button’s light is On on the top of the Slow Controller. If the button’s light blinks, press either button to make it On   Press MENU button   Press 7(↑) 4(↓) buttons as you see on the display of the Slow Controller and select >CONSOLE, then press button.
  • Page 18   022-LOCK/OFF Does not lock automatically after recording   Press button and complete the settings CUE / SEARCH When button is pressed during recording, it memorizes the position of the time and the time can be called easily in playback When SEARCH button is pressed, it jumps to the last CUE point in the selected Block, and to the next CUE point...
  • Page 19 Recording Speed and its Correlated Time Table CAPTURE SIZE 1080 11425 25441 REC TIME EXTENDED OFF(default) OFF(default) 1060 2120 1696 1016 Recording Speed 1000 1200  ...
  • Page 20 Description of Camera Head Menu There are two ways to set the Camera Head Menu. One way is to go into the Camera Head Menu by pressing MENU button on the side of the Camera Body as you see on VF, and the other way is from OCP as you see on Picture Monitor 1 output A How to set the Camera Head Menu from Camera Head Press...
  • Page 21 Descriptions for each Camera Head Menu MENU(1/2) RECORDING Here explains the setting of Imager for recording. The FPN changes if these settings are changed, therefore please do not forget to perform Auto Black Balance by pressing button after any setting has changed PRESET, CUSTOM 24F/S - 1000F/S FRAME RATE...
  • Page 22 SELECT 1 – 8 FREE, LOCK Setting for the number of Blocks, selection, and Lock/Unlock function VF DISPLAY Settings for images on VF and no effect on main output. Setting for ON/OFF of Characters displayed on each VF,MON Picture VF CHARACTER Monitor 1, Picture Monitor 2 0 –...
  • Page 23 Setting for Automatic Recognition Function when Color VF is connected ENABLE, DISABLE FRONT TALLY Setting for Front Tally on Color VF. ENABLE/DISABLE can only be changed when COLOR VF ON. ENABLE is only selectable when COLOR VF OFF(DISABLE is not displayed) VIDEO OUTPUT MODE LIVE, PLAY VF OUT SEL...
  • Page 24 VERSION Information of Firmware Version on each part MENU(2/2) SCAN FORMAT SELECT 1080I59, 720P59, 1080P59, 1080I50, 720P50, 1080P50 SCAN MODE Changes Image Output Format of the Camera. The Format has to be identical with CCU Format when Camera is connected to CCU AUTO IRIS SETTAUTO SETUP MODE OFF,ON IRIS SET MODE...
  • Page 25 -3dB - +12dB MID GAIN Setting for Gain when Gain switch was set as “M” It limits the level less than the Gain set at HIGH GAIN -3dB - +12dB HIGH GAIN Setting for Gain when Gain switch was set as "H". It limits the level more than the Gain set as HIGH GAIN FUNC1 –...
  • Page 26 Setting for CPU System Control when OCP is not connected. accepts the switch control of the Camera Head, and OFF does not accept PRESET FILE LOAD ENGINEER, FACTORY FILE SELECT Selection of the file for uploading. ENGINEER is for User Setting File, and FACTORY is for Factory Setting READY, START, CANCEL LOAD START...
  • Page 27 MEM BOARD ACCESS SNS BOARD ACCESS PIF BOARD ACCESS AUTO DPC Currently No Function FIBER SINGLE MODE CONT ON,OFF SINGLE MODE ON does not provide Power from Optical Fiber Cable. Use this Mode in the case using Single Fiber etc CAMERA ID SETUP PROGRAM NO.
  • Page 28 10 Trouble Shooting 10.1 Possible troubles during system initialization No image output Reboot Camera and CCU as a whole system. Noise on image output. There are three ways to perform trouble shooting. Press ABB button on OCP. If 1 does not solve the problem, reboot Camera and CCU as a whole system. If 2 does not solve the problem, change the setting of FRAME RATE SENSITIVITY COLOR TEMP etc temporarily to see if the problem will be solved, and set it back to the previous settings if solved.
  • Page 29 11 Attention when SHED-HDX. Systems of Telecast Fiber Systems, Inc is used. 11.1 Setup and Connection Hi-MotionII supports SHED-HDX. Systems of IKEGAMI. Set up and connect all the necessary cables according to its User Manual Open the front panel of CCU and find AUX board. There are two red switches in the front part of AUX board and set the one of the switch at upper part as “SINGLE MODE ON”...