Ready2Talk HS BT4 Troubleshooting Manual

We strongly advise watching our "HS BT4 Operation" video before proceeding. Click on the link below.
https://www.youtube.com/watch?v=gzHG60SpLJ4&t=1s
General functions and indicators.
Red LED on headset
Green LED on headset
Blue LED on receiver box
White button on receiver box
Issue
1 The receiver box blue LED is not on.
2 The headset is not working.
HS BT4 Wireless Trouble Shooting Guide
Indicates that the headset is charging and it will stay on until fully charged.
If on fully, this indicates the headset is turned on and made connection
with the receiver box and it's ready to use.
A flashing LED indicates that headset is not paired with the receiver box
and must be paired. See below.
Indicates the receiver box is getting power from the PA box.
This is the pairing button. If glowing red this indicates it has connection
with the headset, If not glowing red, then it hasn't found a headset.
Solution
1) Ensure the 4 pin mic plug is connected into a Ready2Talk PA box, it will
get power automatically.
2) Is the PA box turned on? Ensure power is going to the R2T PA box.
3) You are connecting it to another manufacturer of PA system? Even
though other manufacturers use the same 4 pin mic plug, it won't work.
1) Is the headset's power switch is on, is the green LED on or flashing?
If the green light is not coming on, that indicates that the battery is dead.
Charge the headset using the included USB C cable. See "How to charge
the headset" below.
2) Is the green LED flashing? This indicates the headset can't find the
receiver box and they need to be paired together or the receiver is not
being powered. Check that the receiver's blue LED is on.