Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Trustmade Bobcat 4OR05EB0020
Summary of Contents for Trustmade Bobcat 4OR05EB0020
- Page 1 E-bike Owner’s Manual Model: 4OR05EB0020...
- Page 2 Table of Contents 1. Safety Notes...................................3 1.1 Personal Safety:............................3 1.2 E-bike Safety:............................3 1.3 Electrical Safety:............................3 1.4 Brake Safety:............................4 1.5 Maintenance:............................4 1.6 Additional Warnings:..........................4 2. Installation Steps: Assembling Your Bike......................6 2.1 Fork/Headset Assembly:........................6 2.2 Front Wheel Assembly: ........................7 2.3 Seat Post Assembly:..........................8 2.4 Seat Clamp Assembly:...........................
- Page 3 1. Safety Notes 1.1 Personal Safety: This e-bike is intended for use on paved roads or paths only. Using the e-bike for any other purpose may result in serious injury. Before you ride this e-bike in a busy area or on public roads, practice riding in a safe area free of hazards.
- Page 4 charger cord increases the risk of fire and electric shock. Keep the charger cord away from hot surfaces and sharp edges. Do not handle the charger with wet hands. Do not store or charge the appliance outdoors. The charger must be removed from the socket before removing the battery, cleaning or maintaining the appliance.
- Page 5 reflectors.Never ride your e-bike without the seat provided with the e-bike. This e-bike is not meant for downhill riding or rocky trails. The e-bike is for paved or smooth surfaces only. Do not ride your e-bike in unsafe weather conditions or when the road surface is comprised, with ice, snow, water, sand, or anything else that could cause a loss of traction.
- Page 6 2. Installation Steps: Assembling Your Bike 2.1 Fork/Headset Assembly: PLEASE COMPLETE STEPS IN ORDER. Unscrew the top cover, remove the alloy gasket at the top (you can choose throw away it, which only protects the handlebars during transportation), and insert the stand into the front fork stem. (Figure A) Tighten on the top cap with attached bolt using hex wrench.
- Page 7 2.2 Front Wheel Assembly: Align the disc rotor so it fits between the brake pads. Do not force it. (Figure B) Place the front wheel axle onto the fork dropouts. (Figure C) Rotate and tighten the nut with a tool. Line up the disc rotor to make sure there is space on each side, so they don’t rub.
- Page 8 2.3 Seat Post Assembly: Open the seat clamp and insert the seat post. (Figure A & B) Adjust the suitable height and rotate the clamp to tighten and then shut it. (Figure C) 2.4 Seat Clamp Assembly: Slide saddle into seat post clamp. ...
- Page 9 2.5 Pedal Assembly: Screw each pedal into a crank by hand. The pedals are marked with an R and L, the left pedal tightens to the left, the right pedal tightens to the right. Use an adjustable wrench to finish tightening the pedal in place. ...
- Page 10 3. Battery Connection & Removal Insert the key into the battery keyhole. Turn the key in a clockwise direction (At 90 degrees). Pull out the battery. Replace battery with key in the same position, then turn the key to lock. This model’s battery lock automatically returns to the locked position.
- Page 11 4. Charging the Battery: ◆ WARNING DO NOT LEAVE CHARGING BATTERY UNATTENDED The battery's voltage is indicated by the LED light on the top of the battery and the 4-segment power indicator light on the upper left corner of the display on the handlebars. Battery Level is indicated using 3 different colors;...
- Page 12 5. KD21C LCD Display Instructions 5.1 Power On/Off Press and hold MODE button for 2 seconds to power on and off. The Display automatically shuts down when the bike is not used for 10 minutes. 5.2 Assist Level Operating The assist level ranges from Level “0” to Level “5”. Level “1” is the minimum power and Level “5” is the maximum.
- Page 13 6. Error Code Troubleshooting: In the event of a problem with the electrical components of your bike, the display will show an error code. Compare the code with this list below and how to resolve: 6.1 Error Codes/Source of the Error: Code Error Source of the Error...
- Page 14 7. Warranty Information Please contact your dealer or distributor to know more about warranty. Normally, the warranty covers product defects only that were already present at time of handover. It does not cover normal wear and tear, product misuse, act of God, accident, commercial use, alterations, modifications, improper assembly, water damage, extreme riding, installation of electrical or mechanical components that have been modified, altered or replaced with third-party parts, operator error and improper follow-up maintenance.
- Page 15 Qualified Certificate BOBCAT E-BIKE Model: 4OR05EB0020 Top Assisted Speed: 28 MPH Range: 20-40 miles Spec: 48V 500W 10.4Ah Bike Weight: 54.4 LB Date: 20220110 INQBRANDS INC.
Need help?
Do you have a question about the Bobcat 4OR05EB0020 and is the answer not in the manual?
Questions and answers