Advertisement
Quick Links
MODEL 600015C
AUTOPSY
CARRIER
CAUTION
• Inspect unit and all components
for any loosening that may have
occurred during shipping •
ATTENTION
Review entire manual before
starting assembly
ATTENTION
All images and Drawing in this manual
may not represent your model.
Refer to your particular project for
exact specifications
Mortech™ Manufacturing Inc.
411 North Aerojet Avenue, Azusa, CA 91702
(626) 334-1471 www.mortechmfg.com
Installation and Operating Instructions
CAUTION
DO NOT USE CLEANERS
•
CONTAINING CHLORINE WHEN
CLEANING STAINLESS STEEL
Technical Users' Manual
•
ISO Doc. #OM600015C (REV D)
AUGUST 2014
Advertisement
Summary of Contents for MORTECH 600015C
- Page 1 Technical Users’ Manual Installation and Operating Instructions MODEL 600015C AUTOPSY CARRIER CAUTION CAUTION • Inspect unit and all components DO NOT USE CLEANERS • for any loosening that may have CONTAINING CHLORINE WHEN occurred during shipping • CLEANING STAINLESS STEEL •...
- Page 2 • Is unit draining properly? WARNING • Are all nuts, bolts, and pins secured in place? It is crucial that any work performed on Mortech If unit has an issue contact Mortech Manufacturing Inc. Manufacturing Inc. manufactured items are carried out...
- Page 3 STANDARD DESIGN FEATURES: Design Load: 500 lbs • Fabricated from 1.5 inch square, 11 gauge, 304 The Model 600015C Autopsy Carrier Series is stainless steel tubing designed for use with our stainless steel cadaver trays. It is • Stainless steel has a grained finish and all welds...
- Page 4 Parts listing 600015C Autopsy Carrier TABLE SLOTS RAISING THE TABLE IS ADMINISTERED BY TURNING THE HAND CRANK IN A CLOCKWISE MOTION UNTIL TABLE IS COMPLETELY ELEVATED. TABLE CAN BE LOWERED BY COUNTERCLOCKWISE MOTION. PLACE THE TRAY ON THE TABLE BY LINING UP THE TABLE SLOTS AND LOWERING.
- Page 5 Hand crank assembly is designed to operate smoothly. If tension occurs or lever becomes difficult to rotate call Mortech Mfg. Inc. for assistance. Lever will stop when height is exhausted and lowest level is reached. DO NOT FORCE LEVER WHEN IT STOPS AT MAXIMUM OR MINIMUM HEIGHT.
- Page 6 Parts listing 600015C Autopsy Carrier MODEL T3614 A real time and energy saver, the detachable stainless steel top will ensure a secure fit with no mechanical fastening devices required. It is fabricated from 14 gauge 304 stainless steel with No. 4 finish. Interior long sides are angled to allow for easier body transfer.
- Page 7 METRIC CAP M8 X 1.25 X 50L Brake Lock METRIC NYLOC NUT Brake Lock Release TIGHTEN AND SECURE Mortech™ Manufacturing Inc. 411 North Aerojet Avenue, Azusa, CA 91702 (626) 334-1471 www.mortechmfg.com...
- Page 8 600015C Autopsy Carrier Maintenance MAINTENANCE INSTRUCTIONS The unit requires regular maintenance and follow the EFFECTIVE CLEANING METHODS manufactures directions. Commercial Cleaners - Many commercial cleaners DISINFECTING AND CLEANING compounded from phosphates, synthetic detergents, and Clean all surfaces of the stainless steel with a hard surface alkalis are available for the cleaning of severely soiled or disinfectant/cleaner such as Sheila Shine®...
- Page 9 600015C Autopsy Carrier Maintenance record MAINTENANCE RECORD Date AUGUST 2014 MFGISO DOC. #OM600015C (REV. D)
- Page 10 Training record 600015C Autopsy Carrier TRAINING RECORD Date AUGUST 2014 MFGISO DOC. #OM600015C (REV. D)
- Page 11 Information in this Manual is subject to change without notice of (18) months from the date of shipment. Shipping and and does not represent a commitment on the part of Mortech Labor is not warranted. Items not manufactured by Mortech Manufacturing.
Need help?
Do you have a question about the 600015C and is the answer not in the manual?
Questions and answers