Delfield
™
®
Specification Line®
Self-Contained Glass Door Heated Reach-In
Models
One section
Two section
Three section
SSH1-G
SSH2-G
SSH3-G
SSH1-GH
SSH2-GH
SSH3-GH
SAH1-G
SAH2-G
SAH3-G
SAH1-GH
SAH2-GH
SAH3-GH
SMH1-G
SMH2-G
SMH3-G
SMH1-GH
SMH2-GH
SMH3-GH
SSH1-G
Specifications
Exterior: SS and SA models shall have corrosion resistant stainless
steel exterior cabinet sides, front and shroud. SM models shall have
corrosion resistant aluminum on exterior cabinet sides and will have
stainless front and shroud. All units shall have the upper shroud
hinged with a gas assist stay open feature to provide easy access to
the refrigeration system.
Interior: Cabinet interior shall be corrosion resistant stainless steel
(SS models) or heavy gauge aluminum (SA and SM models). Bottom
and top surfaces shall be die stamped to provide radius corners and
recessed floor. Three wire shelves are provided per section, standard
shelves are chrome plated. Shelves rest on clips which are adjustable
on 1" increments on stainless steel pilasters affixed to the cabinet
interior. Pilasters are removable without tools for cleaning. Mounted
to the interior ceiling, the interior fluorescent light is controlled
automatically through a switch mounted in the hinge assembly to
protect against breakage. Door openings are protected with heavy
gauge stainless steel breaker strips. An air duct shall be mounted to
the ceiling assuring low velocity, even air movement throughout the
cabinet interior.
Doors: Double paned tempered thermopane glass. Constructed with
a combination of extruded aluminum and PVC. Each door has two
980 S. Isabella Rd.
Mt. Pleasant, Michigan 48858
Stainless exterior and interior glass full door
Stainless exterior and interior glass half door
Stainless exterior and aluminum interior glass full door
Stainless exterior and aluminum interior glass half door
Stainless front aluminum exterior and interior glass full door
Stainless front aluminum exterior and interior glass half door
Standard Features
•
Stainless steel interior and exterior (SS)
•
Stainless steel exterior, aluminum interior
(SA)
•
Aluminum interior and exterior, stainless
front (SM)
•
Built in door locks with heavy duty strikes
•
Exterior digital thermometer with high/low
temperature alarm
•
Easy to use electronic control
•
Easy access "flip up" shroud
•
High density foamed in place
environmentally friendly, Kyoto Protocol
Compliant, Non ODP (Ozone Depletion
Potential), Non GWP (Global Warming
Potential) polyurethane keeps energy costs
low
•
Three chrome plated wire shelves per section
•
6" adjustable stainless steel legs
•
Stainless steel breaker strips
•
Stainless steel interior door liner
•
Two year parts & labor warranty
edgemount, self-closing, cam lift style hinges. Doors can be removed
from the cabinet without the use of tools. Door handle is continuous
along vertical dimension of the door. Door gaskets are magnetic and
mount to the door, snapping in place and removable with out tools.
Keyed door lock is mounted to the door. Lock engages into a heavy
duty strike mounted to the cabinet face.
Heating system: Cabinets are designed to maintain temperatures
between 120ºF and 200ºF. Heating elements are helical shaped, with
tubular fins. High speed blower provides uniform airflow in the cabi-
net. Entire heating system is mounted to the exterior of the cabinet
ceiling, outside the food zone. It is assembled as one piece and can
be removed as one piece. Temperature is controlled by an adjustable
electronic thermostat. System on/off switch is located on the front
exterior of the cabinet.
Electrical: Standard electrical is 120/208-240 Volt, 60 Hz single phase.
Connection must be hard wired to junction box on the exterior top
of the cabinet.
Phone: 800-733-8948 or 989-773-7981
Fax: 800-669-0619
Project __________________________________
Item ____________________________________
Quantity ________________________________
CSI Section 11400
Approved _______________________________
Date ____________________________________
www.delfield.com
Options &
Accessories
•
Security (prison) package
•
6" polyurethane casters
•
Incandescent light
•
Door field rehingability
•
Additional shelves
•
Tray slides
•
Stainless steel back
•
Laminate on front, sides and back
•
Bottom mount electrical
•
Stainless steel banking strip
•
Heat shield end
•
Stainless steel kick plate
•
Laminate kick plate
•
4" stainless steel utility base
•
230-50-1 electrical
•
220-60-1 electrical