Advertisement
Quick Links
Installation Procedures
2023-2025 Alfa Romeo
Tonale Ti
SNS 379
READ BEFORE INSTALLATION
3M tape is designed to adhere to the vehicle's clear coat. A clear bra or vehicle wrap will
impair the 3M tape's ability to bond with the surface. This bracket is not recommended for
use with either the clear bra or vehicle wrap.
WARNING: Must remove the front plate PRIOR to
entering an automated car wash or DAMAGE will
occur!
Advertisement
Related Manuals for STO N SHO SNS 379
Summary of Contents for STO N SHO SNS 379
- Page 1 Installation Procedures 2023-2025 Alfa Romeo Tonale Ti SNS 379 READ BEFORE INSTALLATION 3M tape is designed to adhere to the vehicle’s clear coat. A clear bra or vehicle wrap will impair the 3M tape’s ability to bond with the surface. This bracket is not recommended for use with either the clear bra or vehicle wrap.
- Page 2 STO N SHO and vehicle. STO N SHO LLC is not responsible for any damages that may occur to the STO N SHO bracket or vehicle itself due to improper installation, road conditions, driving, or care.
- Page 3 Medium skill level required. If unsure, have bracket installed by your local Dealer or Body shop. Warranty only covers manufacture defects and STO N SHO LLC is not responsible for damages as a result of driving your vehicle. Exercise caution and avoid roadways that will cause damage to your vehicle.
- Page 4 STO N SHO, LLC warrants to the original purchaser only that this product will be free of manufacturing defects in material and workmanship for the life of the product (Excluding pull- pin, see above) provided all maintenance is performed as required to the limitations and exclusions set forth below: Return product to any authorized dealer.
- Page 5 This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. For the name of your nearest authorized STO N SHO dealer, contact: STO N SHO, LLC at (408) 776-4080 or go to www.stonsho.com.
- Page 6 Fig 2 Bracket will be properly aligned when the front plate is approximately ¼” from the bumper and just right of sensor as looking at the vehicle. Fig 3 Use masking tape or any other marking device to ensure proper alignment when affixing to the vehicle.
- Page 7 Fig 4 Fig 5...
Need help?
Do you have a question about the SNS 379 and is the answer not in the manual?
Questions and answers