CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN
INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO
THE INSTRUCTIONS.
Charger
Mains powered chargers will operate within the temperature range of: 0°C
(32°F) to 40°C (104°F).
The chargers designed for your device meet the standard for safety of
information technology equipment and office equipment use. They are
also compliant with the ecodesign directive 2009/125/EC. Due to different
applicable electrical specifications, a charger you purchased in one
jurisdiction may not work in another jurisdiction. They should be used for
the purpose of charging only.
Model: CG10A0502000, UC13
Input Voltage: 100~240V
Input AC Frequency: 50/60Hz
Output Voltage: 5.0V
Output Current: 2.0A
Output Power: 10.0W
Average active efficiency: 79.0%
No-load power consumption: 0.1W
Regulatory information
Hereby, TCL Communication Ltd. declares that the radio equipment of
type TCL 8196G is in compliance with Directive 2014/53/EU. The full text
of the EU declaration of conformity is available at the following internet
address: https://www.tcl.com/global/en/EC_DOC
SAR and radio waves
This device meets international guidelines for exposure to radio waves.
The radio wave exposure guidelines use a unit of measurement known as
the Specific Absorption Rate, or SAR. The SAR limit for mobile devices
is 2 W/kg for Head SAR and Body-worn SAR, and 4 W/kg for Limb SAR.
When carrying the product or using it while worn on your body, either
use an approved accessory such as a holster or otherwise maintain a
distance of 0 mm from the body to ensure compliance with RF exposure
requirements. Note that the product may be transmitting even if you are
not making a device call.
Maximum SAR for this model and conditions under which it
Body-worn SAR (0 mm)
Limb SAR (0 mm)
For more information, you can go to tcl.com.
If sold with the device, depending on the device you purchased.
(1)
(1)
was recorded
LTE Band 3 + Wi-Fi 2.4GHz
LTE Band 3 + Wi-Fi 2.4GHz
4
1.60 W/kg
1.60 W/kg
Need help?
Do you have a question about the TAB10 LTE Gen2 and is the answer not in the manual?