Page 1
OWNER’S MANUAL The following parts are included with your Zodiac Pacer (Model# W83215): (1) Universal (1) Wheel Deflector (1) Finned Disc (1) FlowKeeper™ Valve (2) 45 Degree Elbows Valve Cuff (1) Cleaner Head (1) Pool Pulse™ (12) Hose Lengths (1) 4 "...
Page 2
ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. In no event shall Zodiac Pool Care, Inc. be liable in contract or in tort, or under any other legal theory, for lost profits or revenues, loss of use or similar economic loss, or for indirect, special incidental, consequential or similar damages, even if it has been advised of the possibility of such claim.
Page 3
• The Zodiac Automatic Pool Cleaner connects to the skimmer or dedicated vacuum line with the hose sections provided. Water flows through the diaphragm of the cleaner at a rate of 14 to 19 gallons per minute.
Page 4
• Before installing the Zodiac Automatic Pool Cleaner, examine the interior of your pool carefully. If your vinyl liner is brittle or has stones, wrinkles, roots or metal corrosion in contact with the underside of the liner, or has damage to the base material or supporting walls, do not install the pool cleaner before having a qualified professional perform the necessary repairs.
Page 5
WHEEL DEFLECTOR INSTALLATION (Only used on some pool cleaners.) Some Zodiac Pool Cleaner models require a wheel deflector for proper performance. If your model includes one, slide the wheel deflector over the extension pipe and secure between the two lowest pipe ridges. Make sure the top clips of the wheel deflector are seated in the groove.
Page 6
STEP 4 - BALANCE Zodiac Automatic Pool Cleaners require a specific number of hose weights to compensate for the buoyancy of the hose depending on the cleaner model. A properly balanced pool cleaner hose will create a 45-degree angle from the cleaner head and the bottom of the pool as shown below.
Page 7
STEP 6 INSTALLATION FOR POOLS WITH SKIMMERS FLOWKEEPER VALVE In skimmer installations the Flowkeeper Valve MUST BE used. The pool pump provides more gallon per minute flow than your pool cleaner requires. The Flowkeeper provides a way to regulate the flow with a bypass so the pool pump and the pool cleaner run properly.
Page 8
POOL PULSE The Pool Pulse is a flow meter that measures the volume of water flowing through your Zodiac cleaner. It must be used to properly set the flow and can be used as a diagnostic tool when the cleaner isn't running properly.
Page 9
MODEL# W83251 - Snap (1) hose weight onto the first hose section, one meter from the cleaner head. MODEL# W03000, W83215, and W83216 - An additional hose weight (#W83247) may be necessary to balance the Zodiac Pool Cleaner head. If the cleaner is not balanced correctly in the deep end of the pool (as shown on page 4), turn off the pump and add an additional hose weight approximately 5 to 8 feet away from the cleaner head.
Page 10
" Hose Connector Use when heavy debris or leaf situations exist. 5. W83247 Additional 37g Hose Weight May be required to properly balance the Zodiac cleaner head. ZODIAC POOL CARE, INC. 2028 N.W. 25th Avenue Pompano Beach, FL 33069 1-888-786-7797 www.zodiacpoolcare.com...
Page 11
Foreign objects, such as children’s toys, tree branches and rocks, should be removed manually from your pool prior to operating your Zodiac Pacer. If a blockage should occur, the Easy Access System will allow you to check the diaphragm for damage and remove the blockage in minutes at poolside.
Page 12
Universal Valve Cuff 14. W60050 Flowkeeper Valve 15. W20460 Hose Kit - 12x1 meter - Aqua 16. W33800 Hose Protector 17. W33160 " Connector 18. W83247 Hose Weight ZODIAC POOL CARE, INC. 2028 N.W. 25th Avenue Pompano Beach, FL 33069 1-888-786-7797 www.zodiacpoolcare.com...
Need help?
Do you have a question about the Pacer W83215 and is the answer not in the manual?
Questions and answers