Related Manuals for Omnitec OmniAire 2500 Series
Summary of Contents for Omnitec OmniAire 2500 Series
- Page 1 OmniAire Negative Air / HEPA Air Filtration Machines OmniAire 2500 Series Operation and Maintenance Manual omnicleanair.com 425.290.3922 4640 Campus Place, Suite 100, Mukilteo, WA 98275 USA...
- Page 2 WARNING SAFETY WARNING INSTRUCTIONS READ AND SAVE THESE INSTRUCTIONS This equipment is to be operated only by trained personnel. Do not use near combustible or Do not operate if the cord or plug explosive material. Fire may occur. is damaged. Contact an authorized service facility for examination and/ or repair.
- Page 3 Table of Contents Introduction………………………………………………………………………………………………………………………………4 Application Examples……………………………………………………………………………………………………………….4 Operations………………………………………………………………………………………………………………………………..5 Maintenance………………………………………………………………………………………………………………………………6 Troubleshooting…………………………………………………………………………………………………………………………8 Available Models………………………………………………………………………………………………………………………..9 Omni CleanAir Limited Warranty………………………………………………………………………………………………10 To Submit a Warranty Claim or Receive Technical Support………………………………………………………10 Revision Date: 09222022 Back to Table of Contents...
- Page 4 Introduction The OmniAire 2500 series is a family of construction-grade negative air machines, featuring three models with progressive features. These machines contain a powerful blower and a 24”x 24” HEPA, either 6” or 12” deep. These machines, along with their many accessories can be used to remove airborne particulates and bio- contaminants in many applications, including abatement and construction.
- Page 5 Operations Your OmniAire unit will run 24x7 continuously for years with proper preventative maintenance and prompt replacement of the proper filters. Even when the HEPA filter is fully loaded, the filter is still removing particulates from the air at the rated efficiency yet at a reduced airflow. This will affect the ability of the machine to provide positive or negative pressure within the containment.
- Page 6 Maintenance Preventative Maintenance The motor and blower do not require maintenance and your OmniAire machine will run for years with proper regular replacement of the filters. In addition, the unit’s power cord should be inspected for cuts or other damage regularly.
- Page 7 To replace the HEPA filter ensure that the gasket on the HEPA filter faces inwards toward the flange, slide the filter in place along the filter guides and re-install the filter tabs and filter tab securing nuts. The nuts should initially be tightened to where the stud is flush with the end of the nut.
- Page 8 Troubleshooting Your OmniAire Negative Pressure Machine is designed and manufactured to provide years of trouble-free performance. If there is a problem, please reach out for technical support and we are happy to help. The machine does not start Check that the unit is plugged in and there is 115VAC available. On the Pro model, when selecting a speed the red indicator light should come on.
- Page 9 Available Models OA2500 PRIME, OA2500 PLUS, OA2500 PLUS-A, OA2500 PLUS-B, OA2500 PRO, OA2500 PRO-C Parts and Accessories Product Specifications Family OA2500 Prime Model OA2500 PRIME Family OA2500 OA2500 PLUS Plus Model CFM TrueCFM - Prime Model 1000 CFM to 2500 OA2500 PLUS-A Plus-A Model CFM based on...
- Page 10 All OmniClean machines including the OCA500, 1200, and 1500 series, excluding consumables come with a standard two (2) year warranty. All OmniTec and AgriAir machines excluding consumables come with a standard one (1) year warranty. Warranty covers parts and labor only, excluding consumables.
Need help?
Do you have a question about the OmniAire 2500 Series and is the answer not in the manual?
Questions and answers