Related Manuals for EUPRY P2TH
Summary of Contents for EUPRY P2TH
- Page 1 [Eupry External Temperature and Humidity Probe] [Rev.1.4- 02-SEP-2024] User Guide Eupry External Temperature and Humidity Probe (P2TH) Page 1 of 8 support@eupry.com Eupry ApS | .eupry.com | +45 53 51 77 00...
-
Page 2: Copyrights & Trademarks
—Consult the dealer or an experienced radio/TV technician for help. CAUTION: Changes or modi cations not expressly approved by Eupry could void the user’s authority to operate this equipment according to part 15 of the FCC rules. Page 2 of 8 support@eupry.com... -
Page 3: Table Of Contents
8.1 I have got multiple alarms during the connection process 8.2 I have gotten a new external sensor and now I get more alarms 8.3 The light does not turn on when I press the Eupry Button 8.4 The logger does not light green when I release the button 8.5 Where can I see the ID of the Data Logger and ID of the External Sensor? -
Page 4: Introduction
[Eupry External Temperature and Humidity Probe] [Rev.1.4- 02-SEP-2024] 4 Introduction The following is a manual for the external sensor. The unit works with Eupry’s Data Loggers, and all data can be viewed on the online platform, Eupry Monitoring. 5 Speci cations Temperature Operating Range 2 °C to 100 °C (35.6 °F to 212 °F)*... -
Page 5: Setup Of Eupry External Sensor
Unique serial number A unique serial number of the External Sensors is written as text on the label of the sensor and can be used to identify the unit in Eupry’s system. Unique GRAI code datamatrix A unique GRAI code identi cation, which also includes the serial number of External Sensor is placed on the label of the External Sensor as a data matrix. -
Page 6: I Have Got Multiple Alarms During The Connection Process
Therefore, it is advisable to expand the alarm limits. However, greyzone alarms are not affected by this. To change the limits go to eupry.com/monitoring, and change the critical high and critical low settings for your alarms. -
Page 7: Support
(see gure). 9 Support Please visit the Eupry Knowledge Center for any support enquiries. This can be accessed by selecting the “Support” button when logged in to the Eupry Monitoring. Alternatively, please contact support using the information provided in the footer. - Page 8 [Eupry External Temperature and Humidity Probe] [Rev.1.4- 02-SEP-2024] Updating Typical Temperature Accuracy from ±0.1°C (0.18°F) [@ +20°C to +50 °C] into ±0.1°C (0.18°F) [@ 20°C to 100 °C] And from ±0.2°C (0.36°F) [@ -20°C to +20 °C] into ±0.2°C (0.36°F) [@ 2°C to 20 °C].
Need help?
Do you have a question about the P2TH and is the answer not in the manual?
Questions and answers