Page 1
SKB818D1DS User Manual Refrigerator USER MANUAL...
Page 2
12. ENVIRONMENTAL CONCERNS..............19 FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler – features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it.
Page 3
ENGLISH of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference. 1.1 Children and vulnerable people safety This appliance can be used by children aged from 8 • years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a...
Page 4
– with food and accessible drainage systems; store raw meat and fish in suitable containers in the – refrigerator, so that it is not in contact with or drip onto other food.
Page 5
ENGLISH • At first installation or after reversing Centre or an electrician to change the the door wait at least 4 hours before electrical components. connecting the appliance to the power • The mains cable must stay below the supply. This is to allow the oil to flow level of the mains plug.
Page 6
• Concerning the lamp(s) inside this • The following spare parts will be product and spare part lamps sold available for 7 years after the model separately: These lamps are intended has been discontinued: thermostats, to withstand extreme physical...
Page 7
ENGLISH 3.1 Dimensions Overall dimensions ¹ Space required in use ² 1772 ² the height, width and depth of the appliance including the handle, plus the space necessary for free circulation of the cooling air ¹ the height, width and depth of the appliance without the handle * including the width of the bottom hinges (8 mm)
Page 8
• The appliance must be earthed. The angle permitting removal of all internal...
Page 9
ENGLISH 4. CONTROL PANEL Display Mode Temperature warmer button ON/OFF Temperature colder button It is possible to change predefined sound and temperature colder button for a few of buttons by pressing together Mode seconds. Change is reversible. 4.1 Display A. Timer indicator B.
Page 10
To switch off the function repeat the Coolmatic function to chill the products procedure until the DYNAMICAIR more rapidly and to avoid warming the indicator turns off. other food which is already in the If the function is activated refrigerator.
Page 11
ENGLISH To switch off the function repeat the The alarm stops after closing the door. procedure until the DrinksChill indicator During the alarm, the sound can be turns off. muted by pressing any button. It is possible to change the If you do not press any time at any time during the button, the sound switches...
Page 12
5.3 Vegetable drawer 1. Pull out the rails. The drawer is suitable for storing fruit and vegetables. To remove the drawer (e.g. for cleaning): 1. Pull out the drawer and lift it up. 2. Place the rear part of the drawer (1) on the rails.
Page 13
ENGLISH This device activates automatically when needed. It is also possible to switch on the device manually when needed (refer to "DYNAMICAIR function"). The fan operates only when the door is closed. 6. HINTS AND TIPS 6.1 Hints for energy saving •...
Page 14
• Bottles: close them with a cap and homogenization of internal place them on the door bottle shelf, or temperatures. (if available) on the bottle rack. • Always refer to the expiry date of the • In order to accelerate cooling down of...
Page 15
ENGLISH 8. TROUBLESHOOTING WARNING! Refer to Safety chapters. 8.1 What to do if... Problem Possible cause Solution The appliance does not op‐ The appliance is switched Switch on the appliance. erate. off. The mains plug is not con‐ Connect the mains plug to nected to the mains socket the mains socket correctly.
Page 16
Problem Possible cause Solution Door does not open easily. You attempted to re-open Wait a few seconds between the door immediately after closing and re-opening of closing. the door. The lamp does not work. The lamp is in stand-by Close and open the door.
Page 17
ENGLISH Problem Possible cause Solution Water flows on the floor. The melting water outlet is Attach the melting water out‐ not connected to the evapo‐ let to the evaporative tray. rative tray above the com‐ pressor. Temperature cannot be set. The Coolmatic function is Switch off Coolmatic function switched on.
Page 18
8.3 Closing the door If the advice does not lead to the desired result, call the 1. Clean the door gaskets. nearest Authorized Service 2. If necessary, adjust the door. Refer Centre. to installation instructions. 3. If necessary, replace the defective 8.2 Replacing the lamp...
Page 19
ENGLISH www.theenergylabel.eu for See the link detailed information about the energy label. 11. INFORMATION FOR TEST INSTITUTES Installation and preparation of the clearances shall be as stated in this User appliance for any EcoDesign verification Manual at Chapter 3. Please contact the shall be compliant with EN 62552.
Need help?
Do you have a question about the SKB818D1DS and is the answer not in the manual?
Questions and answers