FKI TL2550 User Manual

Heating plate

Advertisement

Quick Links

User manual
FKI Heating Plate
TL2550 and TL3550
Version 2.0
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TL2550 and is the answer not in the manual?

Questions and answers

Summary of Contents for FKI TL2550

  • Page 1 User manual FKI Heating Plate TL2550 and TL3550 Version 2.0...
  • Page 2: Table Of Contents

    Content Introduction ............................... 3 Generally............................4 Product Description ........................4 Purpose and intended use of the heating plate ..................4 Manufacturer ..........................4 Machine signs ..........................4 Technical specifications and consumption .................. 4 Modification ..........................5 Security ..............................6 Personal safety equipment ........................ 6 Potential Dangers ..........................
  • Page 3: Introduction

    1 Introduction Original operating instructions This manual is FKI Fast Food Teknik's original guide for the Heating plate model series TL- Purpose of guidance This manual is intended to ensure proper installation, use, handling, and maintenance of the Heating Plate.
  • Page 4: Generally

    Purpose and intended use of the heating plate The hotplate is intended for keeping all kinds of food warm by placing a dish or tray with the food on the hotplate. Manufacturer FKI Fast Food Teknik a/s Byghøjvej 5, Verninge DK-5690 Tommerup www.fki.dk Machine signs 1.1.3.1...
  • Page 5: Modification

    Measured sound pressure level: < 60 dB(A) 1.1.4.3 Intended Use The appliance may only be used for food preparation. Modification The appliance must not be modified or serviced by unauthorized persons in any way. If this happens, FKI Fast Food Teknik a/s disclaims any responsibility.
  • Page 6: Security

    FKI Fast Food Teknik a/s disclaims any responsibility for non-compliance with these safety rules, for inappropriate use of the appliance or incorrect settings.
  • Page 7: Transport/Installation/Attachment

    Transport/installation/attachment Transport The appliance is supplied in transport packaging and should only be transported in the same way if it is moved. WARNING: The appliance must not be moved during operation. Moving and setting up the appliance must be carried out by two or more peo- ple! RISK of injury! Wear protective gloves and safety shoes during unpacking and installation –...
  • Page 8: Attachment

    appliance if the power cord or plug is damaged, if the appliance is not working properly, or if it is damaged, or has been dropped on the floor. Any replacement of the power cable must be made by an authorized technician to avoid the risk of injury –...
  • Page 9: Servicing

    Servicing The appliance must always be switched off and disconnected from the power source before start- ing repairs. Repairs to the Heating Plate should only be carried out by authorised personnel. 3 Operation Before commissioning Before start-up, remove all packaging and protective plastics from the appliance and dispose of in accordance with applicable regulations (see section 5.1).
  • Page 10: Repair And Spare Parts

    Repair and spare parts Repairs may only be carried out by authorised service personnel with knowledge of electrical machinery. Specifications for spare parts Pos. Item number Pcs. Description 83-07505 Switch 1-pole red with lamp 72-03623 Thermostat 30-110°C with capillary sensor 72-03570 Cable entry 72-03628...
  • Page 11: Electricity Diagram

    Electricity diagram Pos. Item number Pcs. Description 72-03627 Mains cable 3x1 mm² 83-07505 Circuit Breaker 1-Pole Red 72-03623 Thermostat 30-110°C with capillary tube 83-05451 Heater TL 3550 400W 230V 83-05452 Heater TL 2550 400W 230V...
  • Page 12: Cleaning

    4 Cleaning Generally Remember personal safety equipment see point 2.1 Before using the appliance for the first time, wipe all surfaces in contact with food with a damp cloth. Do not use cleaning agents containing acid. Daily cleaning The heating plate should be cleaned several times a day. Once a day, the Heating Plate is cleaned thoroughly and all external surfaces wiped with a damp cloth.
  • Page 13: Eu Declaration Of Conformity

    6 EU DECLARATION OF CONFORMITY EC Declaration of Conformity 2006/42/EC Annex II A Manufacturer FKI Fast Food Teknik a/s Byghøjvej 5, Verninge DK-5690 Tommerup (+45) 64 75 10 66 hereby declares that: Machine/Type Heating plate type TL 2550 Heating plate type TL 3550...
  • Page 14 Byghøjvej 5 · Verninge · DK-5690 Tommerup · Tel. +45 6475 1066 · info@fki.dk · www.fki.dk...

This manual is also suitable for:

Tl3550

Table of Contents