Description; Introduction; Scope Of Supply; Optional Accessories - AKG DMM 4-2-4 STEREO User Instructions

2 Description

Introduction

Scope of supply

Optional Accessories

Summary

Front panel

DMM 4/2/4 Stereo
Thank you for purchasing an AKG product. This Manual contains important instructions for
setting up and operating your equipment. Please take a few minutes to read the instructions
below carefully before operating the equipment. Please keep the Manual for future
reference. Have fun and impress your audience!
Please check that the packaging contains all the components. If anything is missing, please
contact your AKG dealer.
1 x DMM 4/2/4
1 x mains plug
1 x Quick Setup Guide
For optional accessories, refer to the current AKG catalog or folder, or visit www.akg.com.
Your dealer will be glad to help.
The DMM 4/2/4 is a 19" automatic microphone mixer. Internal signal processing takes place
digitally and on two main buses (stereo). The mixer has analog inputs and outputs.
It also has four balanced inputs, which can be configured as microphone inputs or line inputs
(e.g. for wireless microphone receivers), and two unbalanced AUX inputs.
On the output side it has two stereo channels, a recording output and a headphone output.
Inputs and outputs are controlled by the rotary knobs and circular LED displays on the front
panel. The device has a wide-range power supply unit and is connected to the mains using the
mains cable supplied.
In addition to many digital signal processing functions, the DMM 4/2/4 also has innovative
automatic mixing functions. These mixing functions can be configured via a hardware remote
control.
Up to five DMM 4/2/4 can be cascaded if the four balanced inputs are not sufficient for your
application.
There are nine rotary knobs on the front panel.
Figure 1: Front of DMM 4/2/4
1 to 4: Microphone or line inputs
5, 6: AUX inputs
7: Operating mode
8: Stereo output
9: LEDs for stereo outputs
10: Headphone output
11: Headphone connection
Description
31