TrailFX WA013 Quick Start Manual

`
Fits: TrailFX Winches - W08B, W10B, W12B & WS10B
REMOVE CONTENTS FROM BOX. VERIFY ALL PARTS ARE PRESENT.
READ INSTRUCTIONS CAREFULLY BEFORE STARTING INSTALLATION.
LIMITED LIFETIME WARRANTY
Item Part Details
1 Base Frame
2 Support Bracket - Left
3 Support Bracket - Right
4 M8 X 22 Hex Bolt
5 Support Frame
6 M8 Hex Nut
INSTALLATION PROCEDURE
1. Place the base frame on the floor.
2. Assemble main frame & support frame with base frame using M8 X 70 hex bolts, M8 hex nuts & Washers.
3. Assemble Left & Right Support brackets with the main Frame using M8 X 22 hex bolts, M8 hex nuts & Washers.
4. Assemble Winch mounting plate on the support brackets using M8 X 22 hex bolts, M8 hex nuts & Washers.
5. Insert the header card frame on top of the main frame and assemble using M8 X 22 hex bolts, M8 hex nuts & Washers.
6. Slide the header card inside the frame.
7. Mount the winches on the mounting plate.
8. Display Rack is ready for use.
Page 1 of 2
Winch Display Rack
Part No. WA013
PARTS LIST:
Qty Item
1 7
3 8
3 9
14 10
1 11
26 12
45-60 min
support@trailfx.com
1 866 638 4870
Part Details
Winch Mounting Plate
M8 X 70 Hex Bolts
Main Frame
Washer
Header Card Frame
Header Card
www.TrailFX.com
Cutting Not Drilling Not
Required Required
Qty
3
12
1
26
1
1
Rev 042315