Summary of Contents for tease 1 INCH STANDARD UPPER CABINET
- Page 1 CABINET COLLECTION TEASE miniatures 1 INCH STANDARD UPPER CABINET PARTS LIST U4 x2 U6 x2 U5 x2 MAGNETS x8 WOOD ACRYLIC DOOR DOOR INSERT INSERT PAGE 1...
- Page 2 CABINET BOX ASSEMBLY *YOU WILL NEED WOOD GLUE (WE RECOMMEN ALEENE’S TURBO TACKY GLUE), JEWLERY GLUE FOR MAGNETS (WE RECOMMEND ALEENE’S JEWLERY AND METAL GLUE), AND A SILICONE GLUE SCRAPER. PLEASE NOTE, IMAGE SETS ARE OF OUR 2.5 INCH UPPER CABINET. HOWEVER ONCE YOU USE THE PART LIST ON PAGE 1 TO IDENTIFY YOUR PIECES, ASSEMBLY WILL BE SIMILAR THROUGHOUT.
- Page 3 U4 x2 APPLY GLUE TO RED AREAS IN FIG. 3 AND ATTACH FIG. 3 PIECES U4 x2 TO THE TOP AND BOTTOM TO COMPLETE FIG. 4. LOCATE PIECES U6x2 AND U7. APPLY GLUE TO 1 PIECE U6 AND ATTACH TO CABINET BOX SIDE. THERE WILL BE A FRONT OVERHANG.
- Page 4 APPLY GLUE TO REMAINING PIECE U6 AND ATTACH TO OPPOSITE CABINET BOX SIDE TO COMPLETE FIG. 6. SET FIG. 6 ASIDE. FIG. 6 LOCATE PIECES U8 AND U9. APPLY GLUE TO BACK SIDE OF U8 AND ATTACH TO PIECE U9. MAGNETS SHOULD BE FACING OUT ON U8 AND FRONT DOOR ENGRAVINGS SHOULD BE FACING OUT ON U9.
- Page 5 TO ATTACH DOOR MAGNETS, WE RECOMMEND A DOUBLE POLARITY MAGNET. MEANING ONE END IS POSITIVE AND THE OTHER END IS NEGATIVE. YOU MAY PURCHASE THESE ON AMAZON OR THROUGH OUR WEBSITE AT TEASEMINI.COM BE SURE TO MARK ONE END OF YOUR MASTER MAGNET SO YOU REMEMBER WHICH END TO USE FOR THE DOOR AND WHICH END TO USE FOR THE CABINET BOX.
Need help?
Do you have a question about the 1 INCH STANDARD UPPER CABINET and is the answer not in the manual?
Questions and answers