Decora Fabric Box Roman Blinds Fitting Instructions

REMOVING THE BLIND
CLASSIC ROMAN BLIND
Press the release tab at front of all brackets. Tilt headrail's
back end and release from front.
1 2
CASSETTE ROMAN BLIND
Press the back tab of all brackets. Tilt cassette's back end and
release from front.
WARNING
Young children can be strangled by loops in pull cords, chains, tapes
and inner cords that operate the product.
To avoid strangulation and entanglement, keep cords out of the
reach of young children. Cords may become wrapped around a child's neck. Move
beds, cots and furniture away from window covering cords.
Do not tie cords together. Make sure cords do not twist and create a loop.
MAINTANANCE
The product is maintenance free however we recommend
that regular visual checks are completed to ensure that
no components have been damaged, which could result
in operating difficulties and/or cause a safety risk. If any
maintenance is required we recommend that the work is
carried out immediately, by a reputable blind company.
CLEANING INSTRUCTIONS:
Use a dry lint free cloth to wipe over the fabric of the blind.
CHILD SAFETY
CORD SAFETY
The cords on the back are connected to breakaway clips which
disconnect when weight is put on the cords.
To attach it, push the connector to the clip until it clicks.
BREAKAWAY CLUTCH
Blind can be supplied with a breakaway safety clutch so that
when a horizontal force is applied to the chain, the wheel in the
clutch safely breaks away eliminating any hazardous loops. If
the safety device is activated, untangle and untwist the chain
and reattach.
HOW TO REATTACH:
Place the chain around the wheel. Matching up the wheel to
the adjacent sides of the clutch, push the wheel back into
place until you hear the click.
ROMAN BLINDS
FITTING INSTRUCTIONS (V1)
FIT61