DSPPA DT4000 Quick Start Manual

Description
DT4000 is a high-fidelity audio adapter with distributed system. Dante LAN digital audio transmission
technique is adopted. Input and output between Dante devices is realized through matrix. There are 4 audio
input and 4 audio output interfaces. Two network interface makes it possible to convert analog signal in this
device to network signal and transmit it to another Dante device. This device could also export analog signal
sent by other Dante devices through network.
Features
 Support Dante network protocol, compatible with other Dante devices
 4x4/16x16 audio matrix, 4/16 balanced inputs, 4/16 balanced outputs
 Support cascaded linkage between Dante devices
 1 U slim fashionable design,suitable for 19" rack mount
Specifications
Measured when balanced/unbalanced line input of
this device is 250mV/1kHz and balanced output of
another Dante device is 2V.
Measured when MIC input of this device is 2.5V/1kHz
and balanced output of another Dante device is 2V.
conference@dsppa.com
4-In 4-Out Digital Audio Matrix Processor
Model
Item
/ www.dsppacs.com
DT4000
Input voltage
Freq. Response (±3dB)
Input dynamic range
Input distortion
Input voltage
Freq. Response (±3dB)
Input dynamic range
Input distortion
The specifications will be subject to change without prior notice.
Copyright © Guangzhou DSPPA Audio Co.,Ltd All rights reserved.
DT4000
Parameter
SNR