Download
Share
Print this page
  1. Manuals
  2. Brands
  3. ANADOLU ISUZU Manuals
  4. Electric Vehicles
  5. BIG-E 2024
  6. Introduction and user manual

ANADOLU ISUZU BIG-E 2024 Introduction And User Manual

Hide thumbs

Advertisement

Quick Links

Download this manual
GENEL / PUBLIC
INTRODUCTION AND
USER MANUAL
Revision Number: 01

Advertisement

loading
Need help?

Need help?

Do you have a question about the BIG-E 2024 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for ANADOLU ISUZU BIG-E 2024

  • Page 1 GENEL / PUBLIC INTRODUCTION AND USER MANUAL Revision Number: 01...
  • Page 2 GENEL / PUBLIC...
  • Page 3 Anadolu Isuzu A.Ş. reserves the right to change without prior notice. Thank you for choosing this product. We wish you a pleasant ride.
  • Page 4 GENEL / PUBLIC TABLE OF CONTENTS 1.INTRODUCTION CHASSIS NUMBER AND IDENTIFICATION PLATE ..................... 8 RECOVERY LABEL (QR) ............................8 VEHICLE WARRANTY ............................10 RECOMMENDATIONS / WARNINGS ........................11 GENERAL INFORMATION .............................. 13 STARTING THE ENGINE ............................14 STOPPING THE ENGINE ............................14 VEHICLE EQUIPMENT ..............................
  • Page 5 GENEL / PUBLIC 4.2.8 CLEANING ............................... 36 4.2.9 ERROR CODES ..............................36 4.2.9.1 E 01 : SPARK PLUG OPEN CIRCUIT ......................36 4.2.9.2 E 02 : SPARK PLUG HIGH CURRENT ......................36 4.2.9.3 E 03 : FUEL PUMP OPEN CIRCUIT ......................36 4.2.9.4 E 04 : FUEL PUMP HIGH CURRENT ......................
  • Page 6 GENEL / PUBLIC 1.INTRODUCTION...
  • Page 7 GENEL / PUBLIC Representative Image of BIG-E Vehicle.
  • Page 8 VIN number, vehicle model, maximum loaded weight, engine type, drive system, axle distance, production place with codes together the vehicle chassis number your information contains. VIN PLATE CONTENT Notes ANADOLU ISUZU AUTOMOTIVE IND. AND TRADE INC. Manufacturer name L7e-CU Vehicle category...
  • Page 9 GENEL / PUBLIC VEHICLE IDENTIFICATION NUMBER SYSTEM N A 4 1 L 1 0 G B 0 0 0 0 0 1 (EXAMPLE) MANUFACTURER (AIOS) ANADOLU ISUZU AUTOMOTIVE INDUSTRY AND 1 - 3 INTERNATIONAL IDENTITY NNA: TRADE JOINT STOCK COMPANY CODE MODEL...
  • Page 10 GENEL / PUBLIC VEHICLE WARRANTY The warranty period and conditions of the vehicle are specified in the ‘Warranty Certificate’ supplied with the vehicle. You can find detailed information about the warranty procedure in the ‘Warranty Certificate’. The warranty period in the warranty certificate is 5 years with a homologation criterion of minimum 30.000 km and maximum 60.000 km.
  • Page 11 GENEL / PUBLIC RECOMMENDATIONS / WARNINGS • For a spare key or in case the key is lost, you must inform the authorized service of the serial number information on the ignition key, so please note the serial number information. •...
  • Page 12 GENEL / PUBLIC • Always pay attention to low-voltage cables during operation • The work area should be isolated from normal areas. • Always follow directions and labels to avoid undesirable results. • It is dangerous and forbidden to charge the BIG-E vehicle by towing it with another vehicle and using the regenerative brake.
  • Page 13 GENEL / PUBLIC GENERAL INFORMATION...
  • Page 14 GENEL / PUBLIC STARTING THE ENGINE • The main switch must be in the “ON” position. • Turn the ignition to switch the ignition switch to the ‘ON’ position. • Make sure your seat belt is fastened. • Press the brake. •...
  • Page 15 GENEL / PUBLIC VEHICLE EQUIPMENT...
  • Page 16 GENEL / PUBLIC ELECTRICAL SYSTEMS Energy Storage System 3.1.1 There are two types of energy storage units in the BIG-E vehicle: a 51.2 Volt battery pack and a 12 Volt battery. The battery pack is used to power the vehicle engine and superstructure, while the battery is used to power other auxiliary systems.
  • Page 17 GENEL / PUBLIC Battery 3.1.2 There is 1 piece 12 Volt battery as standard to provide the energy needs of the vehicle lighting and vehicle infotainment systems. In vehicles with a diesel heater option, the number of 12 Volt batteries is 2 piece. These batteries have a capacity of 24 Ah and are located in the battery cabinet on the left side of the vehicle.
  • Page 18 GENEL / PUBLIC While charging the vehicle battery pack, it will not power components other than the display screen (headlights, radio, etc.). The vehicle will not be ready to drive until the icon goes off. Please wait until the icon goes off. Once charging is complete, the vehicle will shut down all components (including the display and battery pack) to avoid energy consumption.
  • Page 19 Rema DIN320 charging gun (CAN line and trigger part should also be in this connector, trigger pins should be short circuited) Please contact Anadolu ISUZU regarding the suitability of the external charger you intend to procure. The network to which the fast charger will be connected must be 3-phase and have a minimum fuse value of 32 A.
  • Page 20 GENEL / PUBLIC DC/DC Converter 3.2.3 The batteries that power the vehicle's lighting and infotainment systems also need to be charged. These 12 Volt batteries are charged by the DCDC converter while the vehicle's battery pack is engaged. POWER TRANSFER SYSTEM Engine 3.3.1 The BIG-E vehicle uses one electric motor.
  • Page 21 The engine or engine driver should not be repaired/replaced. In case of damage or suspected damage with Anadolu ISUZU should be contacted. If a temperature warning regarding the engine or motor driver appears on the display screen, the vehicle should be stopped and the relevant part should be allowed to cool down.
  • Page 22 GENEL / PUBLIC Letter Name Explanation Road data button Allows switching between total road distance and travel distance. Speed/charge status Allows switching between speed and vehicle charge status. button Gear selector position Indicates which position the gear selector is in. Key press status Indicates whether the B1 or B2 button is pressed.
  • Page 23 GENEL / PUBLIC Seat belt icon When this icon is on, it indicates that the seat belt is not fastened. Rear fog light icon When this icon is on, it indicates that the rear fog lamp is active. Engine warning When this icon lights up, it indicates that there is a problem with the engine or the engine driver.
  • Page 24 GENEL / PUBLIC • FM Radio: Listen to FM/AM Radio program. • Phone: Make a Bluetooth call. • BT Music: Listen to Bluetooth music. • Settings: Change the device's settings. • Apple CarPlay: Connect iPhone. • Android Auto: Connect supported Android phone. •...
  • Page 25 GENEL / PUBLIC 1. Location 3. Location When the lock moves from position 1 to position 3, the door opens. DRIVER'S SEAT There is 1 driver seat as standard in the vehicle. Additionally, 1 passenger seat can be added as an option if desired. MIRRORS Inside the vehicle there is an optional interior rearview mirror.
  • Page 26 GENEL / PUBLIC WINDSCREEN WIPER WATER TANK The glass fountain water tank can be accessed by removing the front upper cover. After opening the cover, a maximum of 1 litre of glass washing water can be filled. Antifreeze should be used to prevent the glass from freezing in cold weather. WINDSHIELD WIPER REPLACEMENT There is one outer wiper arm on the windshield.To change the wiper blade, it is removed from its hook on the wiper arm.
  • Page 27 GENEL / PUBLIC Wiper tires winter in season control should be done and if necessary should be renewed. Your wipers changes to the internal mechanism must be made by authorized services.
  • Page 28 GENEL / PUBLIC CONTROL AND INDICATORS...
  • Page 29 GENEL / PUBLIC AIR CONDITIONING CONTROL PANEL The digital control panel helps turn the air conditioner on and off with set values automatically adjusted with the help of temperature sensors inside the air conditioning unit. Cooling 4.1.1 • Press the cooling button to start the cooling mode.
  • Page 30 GENEL / PUBLIC Fan Level 4.1.2 • To set the desired fan level, press the fan button and check which level it is at. Fault Codes 4.1.3 Error Codes 4.1.3.1 E 1 : Internal Temperature Sensor Open Circuit Reason for Occurring: The cable may be cut or the socket may be disconnected. The sensor may be faulty or broken.
  • Page 31 GENEL / PUBLIC 4.1.3.2 E 2 : Outdoor Temperature Sensor Open Circuit Reason for Occurring: The cable may be cut or the socket may be disconnected. The sensor may be faulty or broken. Device Response: When an error occurs, the system shuts down and the error code is displayed on the screen.
  • Page 32 GENEL / PUBLIC Temperature indicators 4.2.1 Indicates that Indicates that the temperature Indicates that the set temperature sensor inside sensor inside the control panel temperature is 35 C. the heater detects 18 C. detects 18 C. Heating Process 4.2.2 4.2.2.1 Start heating YH Basic control panel controls the air heater according to the SET value.
  • Page 33 GENEL / PUBLIC 4.2.2.3 Heating level setting and stopping If you press the button with the fan icon, the level heater will change the heating if the heating is active. You can set maximum, medium and economic heating. If you press the button with the heating icon, the heater will stop if the heating is active.
  • Page 34 GENEL / PUBLIC If you press the button with the off and heating icon again, the fan mode will be stopped. 4.2.3.3 Error display If the device detects any error, it will display an error code on the screen. You can find information about the problem and how to fix it from the error table.
  • Page 35 GENEL / PUBLIC To activate the room thermostat mode, consult an authorized ISUZU service point or follow the instructions specified in the installation instructions. "RTemp" indicates that you are in Room thermostat mode. Resetting the Device 4.2.6 If you press the button with the shutdown icon for more than 5 seconds, the button will turn itself off.
  • Page 36 GENEL / PUBLIC Cleaning 4.2.8 To clean the control panel, please use only a soft, lint-free cloth. Do not allow moisture to enter the casing. Do not use glass cleaners, household cleaners, sprays, solvents, alcohol-based or abrasive cleaners. The control panel must not be disposed of in household waste. Please observe national regulations regarding waste management of electronic products.
  • Page 37 GENEL / PUBLIC while the system is operating, the system will probably detect that the flame is out (E19) or that combustion has not started (E15) and will cool down and go to stop mode. Fault Resolution: *Check the fuel pump cable and connectors. *Remove the fuel pump connector (J7) and measure the resistance value of the fuel pump.
  • Page 38 GENEL / PUBLIC 4.2.9.6 E 06 : Fan Motor High Current Reason for occurrence: The cable may be cut or there may be a short circuit on the circuit. If any part enters the suction propeller side while the device is running, if there is an element that prevents the propeller from rotating, this malfunction may occur as the current drawn by the fan will increase.
  • Page 39 GENEL / PUBLIC *If the resistance test is OK, replace the YHC. *Reset the device using the button or turn off and then on the system power. 4.2.9.9 E 09 : Overheating Sensor Open Circuit Reason for Occurrence:The cable may be cut or the socket may be disconnected. The overheating sensor may have failed.
  • Page 40 GENEL / PUBLIC *If the resistance test is OK, replace the YHC. *Reset the device using the button or turn off and then on the system power. 4.2.9.12 E 12 : Overheating Sensor High Current Reason for Occurrence: The cable may be cut or there may be a short circuit in the circuit. Device Response : When the device detects the error, it wants to switch to stop mode, if the system is hot, it will run the cooling mode before stopping.
  • Page 41 GENEL / PUBLIC Fault Resolution: *Check if the supply voltage from the vehicle to the system is within the appropriate range. YH 24v – Supply voltage must be > 21v. YH 12v – Supply voltage must be > 10.5v. * The voltage on the vehicle battery should not differ from the voltage at the B1 socket end of the device.
  • Page 42 GENEL / PUBLIC power. 4.2.9.17 E 17 : Control Unit Communication Error Reason for Occurring: There may be deformation in the cables that communicate with the control unit of the device. There may be a fault in the main board or control unit. Device Response: When the device detects this error, if it is working, it will switch to stop mode by cooling.
  • Page 43 GENEL / PUBLIC *Try to start the device after putting fuel into the fuel tank. If the device does not work in 2 attempts, it will give the same error again. Reset it from the button or cut the power and then give it again.
  • Page 44 GENEL / PUBLIC SIDE CONTROL PANEL Flasher Key 4.3.1 When the symbol is pressed, the flasher is turned on, and when the upper part is pressed, the flasher is turned off. When the flasher is switched on, the signal lamps in the instrument panel and the function lamp in the switch illuminate and give an audible warning together with all the vehicle's signal lamps.
  • Page 45 GENEL / PUBLIC Automatic Headlight Switch 4.3.5 When the ignition key is activated, the automatic headlight system is activated. When the symbol is pressed, the automatic headlight system is deactivated. When the upper part of the key is pressed, the automatic headlight system will be activated. Beacon Light Switch 4.3.6 It works independently of the ignition key.
  • Page 46 GENEL / PUBLIC Charge Gun Release Switch 4.3.11 The ignition key works independently. When the vehicle station AC charger is plugged in and the charging socket is to be removed without waiting for it to be fully charged, the charging gun can be removed by pressing the symbol. D-N-R (Driving) Key 4.3.12 It works when the ignition key is activated.
  • Page 47 GENEL / PUBLIC Emergency Key 4.3.16 To use the emergency switch, the red coloured safety cover is lifted upwards to open it. When pushed forward, the electricity in the system is cut off and the flasher is turned on, the door keys are in an active working condition. When pulled back, the system returns to normal.
  • Page 48 GENEL / PUBLIC SERVICE AND MAINTENANCE...
  • Page 49 GENEL / PUBLIC CLEANING THE VEHICLE External Cleaning 5.1.1 • Do not clean your vehicle with detergent or chemical materials and do not wipe it with gasoline. • Use pressurized water when cleaning the vehicle, do not leave excess water on the vehicle after cleaning, remove excess water with a cloth or chamois..
  • Page 50 GENEL / PUBLIC BRAKE HYDRAULIC OIL LEVEL CONTROL The cover at the front of the vehicle is removed and the brake fluid reservoir is located behind the cover. The oil level can be checked according to the min and max written on the reservoir. During oil filling operations, the max line should not be exceeded and should not be below the minimum line.
  • Page 51 GENEL / PUBLIC 9. Horn and turn signal lamp operation 10. Battery charge level 11. Lighting, flashing or damaged lights 12. Battery fluid level 13. Brake fluid, power steering fluid, leak 14. Cracks and other damage 15. Abnormal abrasion 16. Tread depth of tires 17.
  • Page 52 GENEL / PUBLIC Air conditioning Maintenance Interval (x1000 Month/Hour Condenser cleaning and 12 Months general condition control Control of evaporator and 12 Months condenser fans Cleaning water drains 12 Months Checking the compressor and 12 Months conveyor system connections Checking the gas line and 12 Months connections Control of system pressures...
  • Page 53 GENEL / PUBLIC General Vehicle Maintenance Maintenance Interval (x1000 km) Month/Hour Brake hydraulic oil change 12 Months Wheel nuts 12 Months Tire air pressures 12 Months Hub bearing 12 Months Brake pipe and brake hose leak 12 Months Brake, signal, parking and fog lights 12 Months Interior lighting 12 Months...
  • Page 54 GENEL / PUBLIC Connect Configurator programmer and review the records from “FLASH” tab. 6 Months programmer will read all critical errors. If necessary, software updates can be completed via the PC programmer. If a fuse is connected to the device, check the fuse and the fuse screw for 6 Months integrity.
  • Page 55 GENEL / PUBLIC TECHNICAL INFORMATION...
  • Page 56 GENEL / PUBLIC Dimensions (mm) Maximum length 3680 Maximum width 1420 Maximum height 1961 Axle range 1970 Front length 1060 Back length Front track width 1200 Back trace width 1185 Weights (kg) Maximum loaded weight 1730 Front axle capacity Back axle capacity 1250 Engine Model...
  • Page 57 GENEL / PUBLIC PRESSURE VALUES Tires Cold Inflation Pressure 3.4 bar/ 49 psi LIQUID PROPERTIES DEFINITION CAPACITY NORM CLASS Rear Axle Oil 1.5L SAE 75W90 (API GL 5) Brake Hydraulic Oil DOT 3...
  • Page 58 GENEL / PUBLIC AUTHORIZED SERVICES...
  • Page 59 GENEL / PUBLIC COUNTRY STORE NAME STORE ADDRESS CONTACT NUMBER Rue Baha H'med, ALGERIA Spa Elsecom +213 (0)23 85 30 86 BP 200 Bab Ezzouar - Alger 2207 Nobel avenue AZERBAIJAN AZ Auto LLC +(994) 124964598 AZ1006 - Bakü Blažuj 78, 71215 BOSNIA Sejari d.o.o.