Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for MAC TOOLS MCM401
Summary of Contents for MAC TOOLS MCM401
- Page 1 MCM401...
- Page 2 English (original instructions) Copyright Mac Tools...
- Page 3 Fig. A Fig. B XXXX XX XX...
- Page 4 Fig. C Fig. D Fig. E...
- Page 5 An estimation of the level of exposure to vibration should MCM401 also take into account the times when the tool is switched MAC TOOLS declares that these products described under off or when it is running but not actually doing the job. “technical data” are in compliance with: This may significantly reduce the exposure level over the total working period.
- Page 6 The undersigned is responsible for compilation of the technical c ) Keep children and bystanders away while operating file and makes this declaration on behalf of MAC TOOLS. a power tool. Distractions can cause you to lose control. 2) Electrical Safety a ) Power tool plugs must match the outlet.
- Page 7 English 5) Battery Tool Use and Care d ) Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached a ) Recharge only with the charger specified by the to a rotating part of the power tool may result in manufacturer.
- Page 8 English d ) Do not use accessories which are not specifically excessive accumulation of powdered metal may cause designed and recommended by the tool electrical hazards. manufacturer. Just because the accessory can o ) Do not operate the power tool near flammable be attached to your power tool, it does not assure materials.
- Page 9 English Mains Plug Replacement spinning attachment strings can entangle your fingers or snag on the workpiece. (U.K. & Ireland Only) If a new mains plug needs to be fitted: Safety Warnings Specific for Sanding • Safely dispose of the old plug. Operations • Connect the brown lead to the live terminal in the plug.
- Page 10 English • Do not use an extension cord unless it is absolutely Indicators necessary. Use of improper extension cord could result in risk of fire, electric shock, or electrocution. Stage 1 Charging • Do not place any object on top of charger or place the charger on a soft surface that might block the Stage 2 Charging ventilation slots and result in excessive internal heat.
- Page 11 English Battery Packs CAUTION: When not in use, place tool on its side on a stable surface where it will not cause a tripping Important Safety Instructions for All Battery or falling hazard. Some tools with large battery packs Packs will stand upright on the battery pack but may be easily When ordering replacement battery packs, be sure to include knocked over.
- Page 12 2 Li-Ion battery packs (C2, D2, L2, M2, P2, S2, T2, X2, Y2 models) Intended Use 3 Li-Ion battery packs (C3, D3, L3, M3, P3, S3, T3, X3, Y3 models) Your MCM401 spot polisher has been designed for polishing 1 Instruction manual painted or unfinished metal, fiberglass, and composite surfaces nOTE: Battery packs, chargers and kitboxes are not included in professional applications.
- Page 13 • This product is not intended for use by persons (including 75 mm may be used with the MCM401. They can be adhered children) suffering from diminished physical, sensory or easily by pressing the back of the accessory to the hook and mental abilities;...
- Page 14 English Optional Accessories speed. If you have trouble changing speed, depress and release the trigger switch and try again. WARNING: Since accessories, other than those offered Tool settings by Mac Tools, have not been tested with this product, use of such accessories with this tool could be hazardous. To Speed 1 0–3000 reduce the risk of injury, only Mac Tools recommended...
- Page 16 MAC TOOLS-EUROPE, STANLEY BLACK & DECKER INC., UNIT 3, EUROPA COURT SHEFFIELD BUSINESS PARK, SHEFFIELD, SI 1XE COPYRIGHT © 2018, 2022, 2023, 2024 MAC TOOLS TEL: 08450 6000 60 WWW.MACTOOLS.COM CUSTOMERSERVICES@MACTOOLS.CO.UK NA622364 05/24...
Need help?
Do you have a question about the MCM401 and is the answer not in the manual?
Questions and answers