GENERAL BEST PRACTICES FOR ASSEMBLY: To Ensure Alignment & Easy Assembly, Secure All Bolts & Washers In Place Before Fully Tightening • Read all instructions before starting. • Clear a flat covered space to begin assembly. • Always best to do it with a friend. •...
PARTS LIST PART NO. PART PART DESCRIPTION FRONT PANEL PEDESTAL REAR PANEL 1 REAR PANEL 2 POST LEG 1 POST LEG 2 LONG SIDE BEAM TOP BEAM SHORT SIDE BEAM SIDE PANEL BOTTOM PANEL FLOWER GROW BAG HARDWARE LIST PART NO. PART PART DESCRIPTION 42+1...
Page 5
STEP 1 PARTS REQUIRED: A, B Place the pedestal (B) on a soft, protected surface. Connect the front panel (A) to the pedestal (B) by using M6X15mm bolt (AA) with allen wrench (CC). Do not tighten the bolts at this step. STEP 2 PARTS REQUIRED: C, D Join the rear panel 1 (C) and the front panel (A)
Page 6
STEP 3 PARTS REQUIRED: E, F Separately insert the post leg 1 (E) and the post leg 2 (F) into the pedestal (B). Connect the post leg 1 (E) to rear panel 2 (D) by using M6X15mm bolt (AA) with allen wrench (CC). Connect the post leg 2 (F) to rear panel 1 (C)by using M6X15mm bolt (AA) with allen wrench (CC).
Page 7
STEP 5 PARTS REQUIRED: G Separately connect the long side beam (G) to the post leg1 (E) and the post leg 2 (F) by using M8X95mm bolt (BB) with allen wrench (CC). Do not tighten the bolts at this step. STEP 6 PARTS REQUIRED: H Connect the top beam (H) to the long side...
Page 8
STEP 7 PARTS REQUIRED: J Insert the short side beam (J) into the long side beam (G). side beam (G) by using M8X95mm bolt (BB) with allen wrench (CC). Do not tighten the bolts at this step. STEP 8 PARTS REQUIRED: K, L Connect the side panel (K) to the bottom panel (L) by using M6X15mm bolt (AA) with allen wrench (CC).
Page 9
STEP 9 side beam (J) by using M6X15mm bolt (AA) with allen wrench (CC). B.Connect the bottom panel(L) to the pedestal (B), the post leg 1 (E) and the post leg 2 (F) by using M6X15mm bolt (AA) with allen wrench (CC). Tighten all the bolts at this step.
Page 10
Warranty • One–year limited warranty. • Proof of purchase (dated register receipt) is required for warranty claims. • It remains the customer’s responsibility for freight and packing charges to and from the service center. STOP! Missing A Part? No Need To Go Back To The Store The store where you made your purchase does not stock parts for this item.
Need help?
Do you have a question about the GFS60105C-2B and is the answer not in the manual?
Questions and answers