TYMO AIRFLOW HC506P Manual

THE QUICK START GUIDE TO YOUR PRODUCT

1. Ensure your hair is dry and detangled before using the device.
2. Plug in the device. The blinking white light indicates it's powered but not yet activated.
3. Press and hold the power button for 3 seconds to activate the device. It defaults to level 3 (360°F/80°C), and the cooling fan will automatically turn on.
4. To change the heat level, briefly press the power button.
5. The indicator light for the chosen level will blink while heating and remain solid once the temperature is reached.
6. Briefly press the fan button to deactivate the cooling fan if desired.
7. The plates will heat up in approximately 50 seconds.
   Note: The barrel is not designed to heat.
8. Long-press the power button to turn off the device. The indicator light will continue to blink as long as the device is plugged in.

HOW TO CURL

1. Section Off:
   Grab a 1-inch section of hair, starting either at the roots or mid-shaft.
   
2. Orientation & Rotation:
   Hold the curling iron vertically and give it a 180-degree twist.
   
3. Glide:
   Gently glide the iron towards the ends of your hair. Slower movement results in more defined curls.
   
4. Loosen Up:
   After curling, use your fingers to gently comb through the curls for a more natural look.
   
5. Set & Hold:
   For fine or soft hair, mist with a holding spray to maintain curl longevity.
   
6. Finish:
   Your curled hairstyle is now complete.
   

HOW TO STRAIGHTEN

1. Section Off: Grab a 1-inch section of hair.
2. Smooth Glide: Gently glide the straightener from the roots down to the ends.
   
3. Precision: For more defined results, pinch the cool tip while gliding.

Documents / Resources

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download TYMO AIRFLOW HC506P Manual