OLIGHT Obulb Manual

IN THE BOX

FEATURES

• 4 light modes: warm white light(high/low), red light, and flashing red light, perfect to create a joyful and cozy vibe.
• Both 55-lumen and 3.5-lumen brightness available for multiple purposes, and running up to 56 hours at the low setting.
• The magnetic charging, simple button, and light weight deliver an easy-to-use experience.
• Made of safe and durable materials, the Obulb is IPX7 waterproof and 1.5-meter drop resistant.
• Operating temperature: 0 ℃ - 40 ℃;
  Storage temperature: -20 ℃ - 60 ℃

SPECIFICATIONS

MODE
Warm White Light (high)	55lumens	3h
Warm White Light (low)	3.5lumens	56h
Red Light	7lumens	7h
Flashing Red Light	7lumens	30h

• All data above are test results according to ANSI/NEMA FL 1-2009 standards.
• The tests are performed using the built-in battery that is fully charged.

PRODUCT OVERVIEW

UNLOCK THE LIGHT AT FIRST USE

Note: Before first use, please press and hold the button for over 2 seconds to unlock the product.

CHARGING

• Before first use please fully charge the product.
• Connect the USB end of the magnetic charging cable (MCC 1A) to an external USB power source, then attach the other end of the cable to the charging port at the bottom of the product. It takes 2 hours to fully charge.
• Charged at 5V/max 0.65A.
• The red indicator means charging, while the green indicator means charging completed.

Note: When the charging cable is connected for the first time, it is normal that the indicator of the cable flashes red once or twice to signal charging cable detection.

BATTERY TYPE

• Built-in 630mAh 3.7V Rechargeable Lithium Polymer Battery.

HOW TO USE THE ADHESIVE METAL BADGE

1. Clean and dry the paste position.
2. Gently and carefully peel out the protective film and DO NOT touch the sticky side.
3. Paste the sticky side of the adhesive metal badge onto the desired position and press it evenly until it is fixed in place.
4. Attach the Obulb on the adhesive metal badge.

HOW TO OPERATE

The button is located at the bottom of the product. It can be operated by pressing the flat part of the bottom, or by pressing the top of the cover provided that the product sits securely on a hard surface.
ON/OFF: Single click the button to turn the light on/off.
CHANGE OUTPUT: When the light is on, press and hold the button to circle through warm white light (low), warm white light (high), red light, flashing red light.
WARM WHITE LIGHT (LOW): When the light is off, press and hold the button for less than 2 seconds to access warm white light (low) directly.
LOCK/UNLOCK: When the light is off, press and hold the button for over 2 seconds, the light will be locked out after a short flash. Under the lockout mode, if press the button for less than 2 seconds, the light will be on with low white light momentarily. To exit the lockout mode, press and hold the button for over 2 seconds until the light is on with low white light after a quick blink.

NOTICE

• When the light is turned off, the current output mode will be memorized for next activation.
• The output brightness will decrease as the battery runs low and its voltage decreases, until the light goes off.
• DO NOT use any charging cable other than the provided MCC 1A cable.

• DO NOT drop the light or impact it heavily to protect the built-in battery.

• DO NOT charge the product if it becomes dirty or wet after used in a wet place. Before charging, please clean and dry it.
• DO NOT let a pet play with it, in case the pet will bite and damage it.
• DO NOT hit it as a ball, which may cause irreversible damage.
• DO NOT use it as a baby toy.
• It may be damaged or distorted at a temperature of 60℃ or higher.

Dongguan Olight E-Commerce Technology Co., Ltd
4th Floor, Building 4, Kegu Industrial Park, No 6 Zhongnan Road, Changan Town, Dongguan City, Guangdong, China.