Crenova V60PLUS Manual

How to close the lid?

Press hard on two sides of the lid.

How to open the lid?

Press the Lid Lock Release Button on both sides to open the lid.

Make a Vacuum Bag

1. Place bag material under the rail bar.
   
2. Slide the built-in trimmer to cut enough bag material.
   
3. Place one end of bag material into vacuum channel (across sealing strip).
   
4. 
   
   1. Close the lid;
   2. Press Single Seal Button to seal.

5. When the indicator light of Single Seal is off, open the lid.
   

Vacuum Seal Your Food

For Dry Food

1. Place open end of bag into vacuum channel.
   
2. Press the Vacuum Seal & Cancel Button, to vacuum seal the food.
   (Press again to cancel the vacuum sealing process.)
   
   Note: the default setting is Dry Food Mode with blue indicator light.

3. When the indicator light of Vacuum Seal & Cancel Button is off, open the lid.
   

For Juicy Food

1. Place open end of bag into vacuum channel.
   
2. 
   
   1. Press the Food Button until the red indicator light is on.
   2. Press the Vacuum Seal & Cancel Button to vacuum seal the food.
      (Press again to cancel the vacuum sealing process.)

3. When the indicator light of Vacuum Seal & Cancel Button is off, open the lid.
   

For Soft Food and Crisp Food

For Soft Food

1. Place your food in bag, place open end of bag into vacuum channel.
   
2. 
   
   1. Press the Mode Button, and the red indicator light is on.
   2. Press the Vacuum Seal & Cancel Button to vacuum seal the food.
      (Press the button again to cancel the vacuum sealing process.)
      

3. When the indicator light of Vacuum Seal & Cancel Button is off, open the lid.

For Crisp Food

1. Place open end of bag into vacuum channel.
   
2. Press and hold the Manual Vacuum Button to vacuum the food, release the button to stop vacuuming process.
   
3. Press the Seal Button to seal the bag.
   

Vacuum Seal with Accessories

1. Connect the vacuum container to your vacuum sealer using a vacuum hose.
   
2. Press the Vacuum Seal & Cancel Button to start vacuum process, the vacuuming process is done after the indicator light is off.
   
3. 
   
   1. Remove hose from vacuum container first.
   2. Then remove the hose from vacuum sealer.

Documents / Resources

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Crenova V60PLUS Manual