eMeet HS100 Manual

Package

Button display

Buttons and Functions

LED Indicators

USB Adapter - eMeet Adapter A300

To re-pair headset to USB dongle, please download eMeetLink application from www.emeet.ai/e-meetlink for settings.

Connection and Pairing

1. Connect to a PC
   Connect eMeet Adapter A300 to one of the PC's USB ports.
   
   To re-pair headset to USB dongle, please download eMeetLink application for settings.
2. Pair a smart phone
   1. Slide and hold the On/Off switch to the Bluetooth position until the LED flashes blue and voice guidance is heard.
      
   2. Select eMeet HS100 from the list of available Bluetooth devices on the smart phone.
      

Power On/Off

Slide the On/Off switch to the On or Off position to power the headset on or off.

Intelligent Wearing Detection

The headset utilizes embedded sensors to perform different operations based on whether or not the user is wearing it.

Auto Pause

Take off the headset when listening to music, playing music will be paused automatically.
Put the headset back on, music will be resumed automatically.
When there is an incoming call, wear the headset, call will be answered automatically.

Enable/Disable Intelligent Wearing Detection

Download eMeetLink to Enable/Disable Intelligent Wearing Detection.

Enable/Disable Ambient Noise

When ambient noise is enabled, you will hear ambient noise, and the speaker and microphone will be muted when you are on a call or listening to music.

Operational Status Indicator

During a call, the operational status indicator will turn blue automatically. To manually turn the operational status indicator on/off, press Volume+ and the Multi-function button at the same time.

Mute/Unmute Microphone

When using the headset during a call, rotate the microphone to mute/unmute it.

Multiple Call Handling

The headset can answer and handle multiple calls simultaneously.

Voice Guidance

Voice guidance are announcements that will guide you through set up, or will give you headphone status updates (e.g. connection and battery status).
By default, the voice guidance function is enabled. You may download eMeetLink to disable this function.

Reset

Resetting the headset clears the list of paired devices and resets all settings.
Hold Volume+ and Volume- at the same time for 10s to restart the headset.

Auto Shutdown

When the headset is powered on, but not being worn, they will automatically shutdown after 8 hours to conserve battery. To turn off this function, please download eMeetLink for settings.

Download Application

Download the eMeetLink PC desktop app for software updates and other custom settings.

Maintenance

• Store the headset in the accompanying pouch.
• To avoid shortened battery life and battery drainage, do not store the headset in hot or cold places (such as in an enclosed vehicle during summer or winter).
• The operating temperature of the headset is between 0ºC and 35ºC.
• Do not leave the headset unused and uncharged for extended periods. Charge the headset at least once every three months.

Documents / Resources

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download eMeet HS100 Manual