eMeet OfficeCore M0 Manual

Also See for OfficeCore M0:

Quick start manual (8 pages)

Table of Contents

Contents

1 Product Overview
2 Product Features
3 Features
4 Instructions for Use
5 Operation Guide
- 5.1 For Mac OS Users
- 5.2 For Windows Users
6 Product Parameters
7 FAQs
8 Contact us
9 Documents / Resources
- 9.1 References
- 9.2 Download manual

eMeet OfficeCore M0 Manual

Product Overview

Product Features

MIC MUTE
Product Features - MIC MUTE

AUX OUT
Product Features - AUX OUT

Features

Pick up & hang up Button
Volume - button
Volume + button
Microphone mute button
Speaker mute button
USB power supply port
Audio output port

Instructions for Use

Use a USB Cable to Connect PC
When a USB cable is connected to a PC, the eMeet OfficeCore M0 auto-matically powers on.
When the USB cable is disconnected, the eMeet OfficeCore M0 auto-matically powers off.

Operation Guide

For Mac OS Users

Setting Default Microphone (Mac OS)

Select System Preferences > Sound.
Under the Sound tab, click input, and then select eMeet M0.
If necessary, adjust input volume at Settings for the selected device on the same panel.

Set Default Speaker (Mac OS)

Select System Preferences > Sound.
Under the Sound tab, click Output, and then select eMeet M0.
If necessary, adjust output volume at Settings for the selected device on the same panel.

For Windows Users

Set Default Microphone (Windows Vista/7/8/8 1/10)

Select Start > Control Panel > Hardware and Sound.
Under the Sound tab, click Manage Audio Devices Click the Record tab on the top of the displayed setup window.
Under the Record tab, select eMeet M0, and then click the Set Default button Click OK to save your changes.
If necessary, you can make changes to the property (level) of the same panel to adjust input volume.

Set Default Speaker (Windows Vista/7/8/8 1/10)

Select Start > Control Panel > Hardware and Sound.
Under the Sound tab, click Manage Audio Devices. Click the Playback tab on the top of the displayed setup window.
Under the Playback tab, select eMeet M0, and then click the Set as Default button. Click OK to save your changes.
If necessary, you can make changes to the property (level) of the same panel to adjust output volume.

Product Parameters

Rated output power of speaker	3W RMS
Frequency response	20Hz ~ 20KHz
SNR	≥80 dB
Microphone sensitivity	-26 dBFS
MIC Qty	4
Polar Pattern	360º omni-directional
Dimensions (mm)	80 x 80 x 40.7 ±0.5mm

FAQs

Question/Problems	Possible Reason	Troubleshooting
The eMeet M0 does not respond when the PC is connected a USB cable.	The USB cable is not properly inserted. The USB cable is damaged.	Remove and insert the USB cable again. Replace the USB cable.
The speaker does not make sound after the eMeet M0 is connected.	The speaker is not properly set. The eMeet M0 speaker is muted.	Properly set the speaker according to "Instructions for Use" Disable the speaker mute button of the eMeet M0.
The microphone does not make any sound after the eMeet M0 is connected.	The microphone is not properly set. Enable the mute button of the eMeet M0 microphone.	Properly set the microphone according to "Instructions for Use". Disable the microphone mute button of the eMeet M0.
If the problem is not solved after trying the above methods.	There may be a device driver recognition error.	Select Device Manager, locate the option for Sound, video and game controllers. Uninstall the driver of the eMeet M0. Then remove and insert the USB cable again