Advertisement
Thank you for purchasing your new Logitech QuickCam Pro 9000, with an autofocus, glass lens system. This guide will help you install and get the best performance from your webcam.
Install the software before plugging in the camera. Many of your camera's extended features, including autofocus, will not operate properly without the complete software installation.
Insert the installation CD into your CD-ROM/DVD-ROM drive. Your CD should start automatically. If it does not, follow the steps below:
Wait until you are prompted by the software before connecting your camera to an available USB port on your computer.
Your camera comes with Logitech RightSound Technology. RightSound Technology cancels echo and significantly reduces background noise. The following steps will ensure the best possible audio performance:
Tip
Do not place objects between you and the microphone.
The first time that you start QuickCam, you are guided through the Microphone/Speaker Setup Utility and Audio Tuning Wizard that lets you do the following:
In situations with loud and irregular background noise, your voice can become distorted when using noise suppression. If this occurs, disable noise suppression in the QuickCam software.
Tip
To change your audio settings in the QuickCam software, click the Settings button, and then click the Audio tab.
Your camera is now set up and ready to go!
There are many ways to enjoy using your new webcam, including
To start the Logitech QuickCam software, do either of the following:
Tip
To personalize your video calls with customized Avatar images, Face Accessories, or Fun Filters, click the Video Effects button.
Logitech RightLight 2 ensures that you automatically get the best image quality in harsh, dim, or back lit conditions that usually cast a shadow on your face. When your camera determines that you are experiencing these situations, a dialog box appears asking if you want to turn on Logitech RightLight 2. Click Yes to let your camera automatically adjust frame rates, color, and exposure to produce the best image quality.
To manually adjust these settings, click the Settings button.
The autofocus system will ensure that images as close as 10 cm to the camera will be put in focus, automatically. If you wish to control the lens focus manually, switch to manual mode in ''autofocus'' controls on the Settings tab of the QuickCam software.
Audio Information. Go to http://www.logitech.com/rightsound.
Software Updates. Go to http://www.logitech.com/support.
Additional Help. Launch the software and click the Help button.
To learn more about Logitech products, go to http://www.logitech.com.
Logitech Address. Logitech, Inc., 6505 Kaiser Drive, Fremont, California 94555, U.S.A.
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Advertisement
Need help?
Do you have a question about the QuickCam Pro 9000 and is the answer not in the manual?
Questions and answers