Sony Cybershot,Cyber-shot DSC-G3 Instruction Manual page 19


Touch [Encryption Key]  Input the encryption key using
the keyboard 
8
Touch [Easy] 
 check your settings on the confirmation screen 
 [Save] 
Notes
Network device connections and setting methods differ according to the device.

The following are needed to connect the camera to a network:

An internet service provider (ISP) contract

ADSL modem or other network device

Access point or wireless router

Access point setting information (SSID)

If you do not know the settings to make, be sure to check with the person who set up the access

point, administrator, or with your service provider.
The auto power-off function does not operate.

When connected to a network, if you do not operate the camera for about three minutes, the

camera may disconnect from the network automatically to save battery power. In these cases
establish the connection again.

Using the keyboard
When manual character input is needed, touch the input field to display the keyboard screen.
When you are finished with input, touch
The input language is the display language of the camera.

.
 check your connection name 
 [OK].
on the bottom right of the screen.
19