DREVO Calibur Manual
![]()
Pairing Instruction
- Turn on the Bluetooth switch on the back of the keyboard.
![DREVO - Calibur - Pairing Instruction - Step 1 Pairing Instruction - Step 1]()
- Turn on the Bluetooth of the device.
![DREVO - Calibur - Pairing Instruction - Step 2 Pairing Instruction - Step 2]()
- Press and hold down the FN key along with one of the following keys: Q, W, E Hold for several seconds until the white Bluetooth light begins to blink rapidly.
![DREVO - Calibur - Pairing Instruction - Step 3 Pairing Instruction - Step 3]()
- Then DREVO KEYBOARD will pop up on the Bluetooth Menu. Click connect.
![DREVO - Calibur - Pairing Instruction - Step 4 Pairing Instruction - Step 4]()
- Follow the guide to set up the keyboard.
![DREVO - Calibur - Pairing Instruction - Step 5 Pairing Instruction - Step 5]()
- If you want to store other devices, simply turn off the Bluetooth on the first device connected, and then repeat the steps above by switching to another key's profile (W or E).
- The system requirements are as follows:
![]()
Note:
- The light on the space bar indicates the battery's charge status. This light will blink red if the battery is low, and blinks green once it begins charging. Once charging is complete, the light turns back to normal.
- The keyboard automatically enters sleep mode after 30 seconds of inactivity while in Bluetooth mode. You can then press any key to activate the keyboard.
- If you're using this keyboard with pc, turn off the Bluetooth switch on the keyboard before turning off your computer so that the keyboard won't lose the connection with the computer.
- If you want to modifier keys of this keyboard in a mac, you could download the Karabiner-Elements to remap those keys. (Because the mac doesn't support completely the Bluetooth 4.0, so the calibur will be regarded as a Bluetooth device and not a keyboard, you can use it to type, but you can't remap keys.)
Backlight Customizing Instruction
- Press down FN + one of PU/PD for several seconds until the light starts to flash rapidly.
- You can design your own backlight scheme by press
ing keys with different times. For instance, if you want to change the W from white light to a blue light you press it four times, light color changes by the times you press. This same process can be repeated for al keys on the keyboard. - Press FN + PU/PD again (the one you originally pressed) to store your scheme.
Lighting Effects
![DREVO - Calibur - Lighting Effects - Part 1 Lighting Effects - Part 1]()
![DREVO - Calibur - Lighting Effects - Part 2 Lighting Effects - Part 2]()
FN + Left Win: Window lock key
FN + Left Ctrl: Switch the Ctrl and Caps key function
FN + Space: Play/Pause lighting effects.
FN + Backspace: Light on mode
Reset the Keyboard
You can reset the keyboard by pressing down ESC+Delete+Left Ctrl+Right Ctrl for 5 seconds.
Please refer to the DREVO FAQ page at http://www.drevo.us before you decide to make a request for a replace or refund. If the mentioned solutions can't solve your problem, we will provide you with immediate service in replacing or refunding your product as soon as possible.
Documents / Resources
References
Download manual
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Download DREVO Calibur Manual
Need help?
Do you have a question about the Calibur and is the answer not in the manual?
Questions and answers