Cleer ENDURO ANC Manual
Also See for ENDURO ANC:

Advertisement

Cleer ENDURO ANC Manual

INTRODUCTION

Box contents

Overview
Overview

Fitting
Slide to adjust the headband to fit to your head.
Fitting

Correct wearing position

QUICK START GUIDE

  1. Press and hold the power button for 2 seconds to turn on your ENDURO ANC.
    QUICK START GUIDE - Step 1
    • ENDURO ANC will go into pairing mode automatically when powered ON for the first time (if you need to manually go into pairing mode, please follow the steps).
    • ENDURO ANC will automatically connect to the last connected device if it is in range and available for pairing.
  2. Find "Cleer ENDURO ANC" on the Bluetooth device list.
    QUICK START GUIDE - Step 2
  3. Enjoy your ENDURO ANC.
    QUICK START GUIDE - Step 3


Cleer+ App
The Cleer+ app gives you a more customized control to your ENDURO ANC, download the Cleer+ app from the App Store (for iOS devices) or the Google Play (for Android devices). With the Cleer+ app, you can:

  • Turn on and off the Ambient Noise Control
  • Real-time tuning of the Ambient Noise Control level
  • Customize the equalizer setting of your ENDURO ANC.
  • Choose preset music profi es to tune your ENDURO ANC to more accurately reproduce the style of music you listen to.
  • Change the Bluetooth name of your ENDURO ANC.
  • Receive software updates when new features and improvements are available.
  • Check playback time and battery level of your ENDURO ANC.
  • Voice prompt selection.

*Sound settings are saved in your ENDURO ANC and can be enjoyed with any player you connect to your ENDURO ANC.
www.apple.com
play.google.com

Bluetooth pairing

NFC
Bluetooth pairing - NFC

  1. ENDURO ANC is OFF. Press the power button for 2 seconds to turn on your ENDURO ANC.
  2. Turn on NFC on your device and place it near the left ear cup.
  3. Follow the instructions on your device and confirm pairing.
  4. ENDURO ANC is now paired.

*For NFC enabled devices only
Or

Pairing Mode
Bluetooth pairing - Pairing Mode

  1. ENDURO ANC is OFF. Press and hold the power button until the LED blinks white & red.
  1. Find "Cleer ENDURO ANC" on the Bluetooth device list.
  2. ENDURO ANC is now paired.

Mufti-function button

Mufti-function button

ANC button

ANC button

Volume control

Volume control
*Only active when ENDURO ANC is powered ON.

Line-in connection

Line-in connection

LED behavior

LED behavior

Charging

Charging
Connect ENDURO ANC to a power source with the provided USB-C cable. A 10-minute charge will give 3 hours of playtime. ENDURO ANC can be fully charged in 3 hours.

Restore factory settings

Restore factory settings

  1. ENDURO ANC is OFF.
  2. Press and hold the power button for 8 seconds, during which you will hear the voice prompt announce "Power on, Looking for device" then two audio tones, and at the end the voice prompt will announce "Power off'.
  3. You can now release the power button. Your ENDURO ANC is now reset to factory settings.

Specifications

Driver: 40mm Ironless DriverTM
Supported audio CODEC: SBC, aptx Adaptive
Frequency response range: 20-40KHz (Line in)/ 20-20KHz (Bluetooth)
Connections: USB-C to 3.5mm for audio, USB-C to USB-A for charging.
Supported Bluetooth profiles: BT 5.0, spp v1.o, HFP v1.6, A2DP v1.3.1, AVRCP v1.6
Charging: A 10-minute charge will give 3 hours of playtime. ENDURO ANC can be fully charged in 3 hours.
Bluetooth transmission frequency range: 2.402-2.480GHz
Bluetooth transmission power: <4dBm
Battery: Rechargeable lithium ion rectang e cell (3.7V)
Playback time (BT): 60 hours
Weight: 280 g

Documents / Resources

References

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Cleer ENDURO ANC Manual

Advertisement

Need help?

Need help?

Do you have a question about the ENDURO ANC and is the answer not in the manual?

Questions and answers

Table of Contents