RANVOO AICE (AICE3/FG7) Manual

Operation Instructions

1. Please charge to activate the A/C function before the 1st use;
2. If the device language is not in your preference, you may:

1. Download the Metaura App and pair it with your device. The device language will follow your App language automatically;
2. Slide left () on the homepage Tap on the "Settings" Tap on the "Language" Choose the language you prefer.

Interface A

	Health : Tap to view your heart rate and blood o xygen;
	Workout: Tap to view your workout data;
	Weather: Tap to view your local weather forecast (requires App connection);
	Settings: Tap to enter interface B.

Interface B

Interface C

	Bluetooth: View the pairing status, it's colorful when connected;
	Wearing Detection: Once activated, AICE 3 will enter standby mode when you take it off, and resume working when you wear it back. Besides, to avoid accidental touch, no operation is allowed except for temperature and wind speed adjustment when wearing;
	Screen Timeout: Tap to change the screen timeout from 5s to 60s, slide right () to exit;
	System Information: Tap to enter interface D.

Interface D

	Firmware Information: Tap to view the firmware information of the device;
	Firmware Upgrade: Tap to upgrade the firmware information of the device;
	Engineering mode: To facilitate troubleshooting for engineers, not recommended to enter for users;
	Language: Tap to switch the language of the device.

How to use the app?

Control AICE 3 and view your health data more conveniently on the App.

Remarks

1. The smaller number on the left indicates the lowest temperature for the next 3 hours, and the larger number on the right indicates the highest temperature, while the number in the middle is the current ambient temperature detected by AICE 3;
2. In standby mode, both the power button and function button of AICE 3 will be dimmed, and the A/C and fan function will be unavailable, but the screen can still be operated.

Cautions

1. Charge to activate the A/C function before the 1st use;
2. Please download the Metaura App, connect to AICE 3 and upgrade the firmware to experience better performance;
3. Please drain the battery to 10%, and then charge it to 100% to fully activate the battery (only need to be done once)*;
   * You can perform the discharge and charge cycle at anytime. But it's recommended to be done as soon as possible, for example right after the firmware upgrade.
4. Once connected to your phone, AICE 3 will be taken as headphones, and all sounds from your phone will be played on AICE 3 instead of your phone. *
   * If you don't want AICE 3 to act as headphones, you can go to "Settings" "Bluetooth" Tap on AICE 3 Select the device type Choose "Others". All sounds will play on your phone instead of AICE 3.
5. To protect its battery system from overcharging, AICE 3 will enter standby mode when charging. You can press the power button to charge and play.
6. Tap the power button on the App to enter / exit standby mode. Under standby mode, both the power button and the function button will be dimmed, but the screen is operable and Bluetooth is still connected.
7. To protect your hearing, the sound volume of AICE 3 might be limited by the phone. To unlock it, you may go to "Settings" "Sounds & Haptics" "Headphone Safety" Turn off "Reduce Loud Sounds".
8. If the device language is not in your preference, you may:

1. Download the Metaura App and pair it with your device. The device language will follow your App language automatically;
2. Slide left () on the homepage Tap on the "Settings" Tap on the "Language" Choose the language you prefer.