Terms Term Explanation Control Electronics of Geberit products which can be controlled with the HyTronic Service Handy. Sensor The sensor is located at the control and emits infrared light. It detects the user of a product and is visible through a dark plastic window.
These operating instructions describe the operation of unidirectional controls. The Geberit HyTronic Service Handy is used for setting and querying setting values of different electronic Geberit products such as washbasin taps, WC controls, urinal controls and hygiene pumps. In case of misuse, no guarantee or liability claims in the event of personal injury or material damage are accepted.
HyTronic Service Handy, Unidirectional Operation Operation Controls Switch on / Switch off Display, indication of the menu, menu items, etc. Left / Right, jumping within a selection Confirming the selection / input Navigation, jumping to the beginning / the end of the menu list Navigation, jumping up / down by one menu item...
HyTronic Service Handy, Unidirectional Operation List of menu items The functions described in the following may only be set by qualified personnel. With the HyTronic Service Handy, the menu items listed below can be set individually. The numbers and terms in the column "Menu item" correspond to what can be seen on the display of the HyTronic Service Handy.
Page 7
HyTronic Service Handy, Unidirectional Operation Programs Menu item Description Application Setting range Factory [EN] setting [DE] Select power-on flush. a) Test function On = [ON] On = [ON] [PowOnFlsh] Program activates / deactivates b) Hygiene Off = [OFF] [NetzEinSp] a flush after power failure. Select dynamic flush.
HyTronic Service Handy, Unidirectional Operation Washbasin taps Commands Menu item Description Application Setting range Factory [EN] setting [DE] Switch valve. a) Function test of the valve On = "OK" [Valve] Flushes until turned off (closes b) Flushing out of stagnant Off = "OK"...
Page 9
HyTronic Service Handy, Unidirectional Operation Counters Menu item Description Output [EN] [DE] Total number of days of operation. Days [Days?] Displays number of days of operation since commissioning. [SumBetrT?] Total number of uses. uses (x 1000) [Uses?] Displays number of uses since commissioning. [SumBenut?] (e.g.
HyTronic Service Handy, Unidirectional Operation WC controls Commands Menu item Description Application Setting range Factory [EN] setting [DE] Release the full flush volume. Function test Start = "OK" [FullFlush] [VollMenge] Release the partial flush Function test Start = "OK" [PartFlush] volume.
Page 11
HyTronic Service Handy, Unidirectional Operation Settings Menu item Description Application Setting range Factory [EN] setting [DE] Set detection time. 1 - 60 seconds 7 seconds [DetectT] Sets the minimum detection [VerweilZ] time that is necessary to release the flush. Set flush delay. 1 - 15 seconds 3 seconds [DelayTime]...
HyTronic Service Handy, Unidirectional Operation Sanitary flushings Commands Menu item Description Application Setting range Factory [EN] setting [DE] Switch valve 1. a) Function test of the valve On = "OK" [Valve 1] Opens the valve and closes it b) Flushing out of stagnant Off = "OK"...
Page 13
HyTronic Service Handy, Unidirectional Operation Counters Menu item Description Output [EN] [DE] Total number of days of operation. Days [Days?] Displays the number of days of operation since commissioning. [SumBetrT?] Total number of interval flushes of valve 1. Flushes [IntFlshV1] [SumIntSp1] Total number of interval flushes of valve 2.
LED flashes 7 times in a row (= digit 7) The following information is displayed: short break LED flashes 3 times in a row (= digit 3) GEBERIT GEBERIT short break LED flashes 6 times in a row (= digit 6)
HyTronic Service Handy, Unidirectional Operation The following information is displayed: Operation of menu types A, B, C, D Unidirect Unidirekt Compare selected menu item with the following Back Zurück examples and make desired settings. Urinal Urinal Menu type A. Select a function. Armatur 24 CleanMode 24 Reinigung...
24 Reinigung Confirm with "OK". Command to reset is transmitted to control Point to Auf Sensor Device!! richten!! The following information is displayed when the transmission is finished GEBERIT GEBERIT Bidirect Bidirekt 08 Unidirect 08 Unidirekt Settings Einstellung Result Settings are now set to factory settings.
The symbol indicates that the product cannot be disposed of with the normal household waste. Old equipment should be returned directly to Geberit where it will be disposed of correctly. Addresses to which equipment can be returned are available from the responsible...
Need help?
Do you have a question about the HyTronic Service-Handy Unidirectional and is the answer not in the manual?
Questions and answers