Advertisement
Quick Links
Thank you for purchasing the JumpsPower™. Before operating your new device, please read this user's manual
carefully. This manual will inform you of the JumpsPower™'s specifications and proper operation procedures,
safety warnings and other useful information. Please keep this manual for easy reference.
PRODUCT LAYOUT：
OPERATION GUIDANCE:
【Power Button】 - For checking battery level, turning on the charging function, and changing the mode of LED and
Emergency light (Normal / Strobe / SOS mode).
Advertisement
Related Manuals for ArnosMater JumpsPower AMG24
Summary of Contents for ArnosMater JumpsPower AMG24
- Page 1 Thank you for purchasing the JumpsPower™. Before operating your new device, please read this user's manual carefully. This manual will inform you of the JumpsPower™'s specifications and proper operation procedures, safety warnings and other useful information. Please keep this manual for easy reference. PRODUCT LAYOUT：...
- Page 2 A. If jump start the 12V vehicle, set【12V / 24V Switch】to【12V Mode】 or【 Auto Mode】. B. If jump start the 24V vehicle, set【12V / 24V Switch】to【24V Mode】 【LED / Emergency Light Switch】-For choosing the LED or Emergency light. 【BOOST Button】- If jump start the 24V vehicles or 12V vehicles with a battery at a extremely low voltage or ZERO voltage, this button must be pressed down for 3 seconds until the indicator light above the corresponding 【12V Mode】or【...
- Page 3 1. Before jump starting the vehicle, please check below carefully. ◆ Make sure the 【12V / 24V Switch】 is set on the right voltage mode: 【 12V Mode】 for 12V vehicle while 【24V Mode】for 24V vehicle. ◆ Make sure the battery level of JumpsPower™ is above 60% (At least 3 indicator lights stay ON). 2.
- Page 4 HOW TO CHARGE MOBILE ELECTRONIC DEVICES: 1. Make sure the electronic device is 5V powered. 2. Connect the supplied USB cable to the USB output port of the JumpsPower™ and connect to the electronic device for charging. (If the supplied cable is not suitable for your device, you can select your own appropriate USB charging cable).
-
Page 5: Troubleshooting
terminals, please double check and reconnect; If no indicator lights is on, please press down the 【BOOST button】for 2-3 seconds, until the indicator light is on, means ready to jump start. If no battery indicator light is on, means the jump starter with low battery, need to recharge. Q5: Will reversing polarity connections of the jump start cable damage the vehicle? A5: Not at all, JumpsPower™... -
Page 6: Toxic And Harmful Substances
on the JumpsPower™. circuit has been shut off. 【12V/24V Switch】is set on The vehicle battery is either at Press down the【BOOST Button】for 2-3 【12V Mode】 , jumper cable is seconds until the 【12V Indicator】light is on, extremely low or ZERO well connected but no voltage, or is not connected and it's ready to jump start. -
Page 7: Warranty Information
◆ Do not use as a toy and keep away from Children to avoid any accident ◆ Do not allow the product to become wet ◆ Do not immerse the product in water ◆ Do not operate the product in explosive atmospheres, such as in the presence of flammable liquids, gases or dust ◆...
Need help?
Do you have a question about the JumpsPower AMG24 and is the answer not in the manual?
Questions and answers