SEVR -EVR1 Manual

DATA SHEET
SEVR-EVR1
CHARGING
CABLE REEL
EV charger with up to
6m output cable on
retractable reel
RCM
Description
Keep EV charging cables off the floor and tidy when stored with SEVR's new EV Charging Cable Reel.
This all-in-one charging and storage solution features up to 6m of cable length that automatically
retracts into a wall-mounted housing, and a built-in 3kW, 7kW or 22kW charger.
The Australian-first Charging Cable Reel includes a Type 2 output plug, and can be simply mounted to
the wall and plugged into a standard Australian power point (3kW model), or hard wired for maximum
charging speeds (7kW and 22kW). A built-in screen displays vital charging information.
Technical Information
Input Voltage
Phase/Current
Voltage/Power
Insulation Resistance
Contact Resistance
Protection Rank
Input Plug
Output Plug
Input Cable Length
Output Cable Length
Pulling & Rolling Strength
Operating Temperature
Life Span
Inlcuded Accessories
Electrician Needed
The information contained in this document is the sole property of SEVR Group. Any reproduction in part or as a whole without the written permission of SEVR Group is prohibited.
sales@sevr.au | www.sevr.au
SV-EVR1-3-RET-6B
240V
1Phase/15A
250V/3.5kW
Standard 15A
6m
>1000 times (Slow pull natural recovery)
15A to 10A adaptor
No
SV-EVR1-7-RET-5B
240V
1Phase/32A
250V/7kW
>100M ohm (DC500V)
0.5 ohm Max
IP55
NA
Type 2
1.5m
5m
> 12.8lb
-35°C to +50°C
NA
Yes
sev r. au
Plug Type
Type 2 plug
SV-EVR1-22-RET-5B
415V
3Phase/32A
480V/22kW
NA
5m
NA
Yes
1