Listening to Radio
You can listen to the chosen band (FM, (SW1,2),MW broadcast stations) by using
either the automatic or manual tuning operation.
Remote Control Unit
2
1
Press TUNER/
Tune in to the
BAND button.
desired station.
Automatic Tuning 1
•
The selection toggles back
and forth between "FM
➝
➝
(SW1,2)
MW " each time
Automatic Tuning 2
the TUNER(BAND) button is
pressed.
Manual Tuning
increase or decrease the frequency incrementally.
Main Unit
Press the Function
1
2
Select a broadcast
button to select the
station.
desired band
(FM,(SW1,2),MW).
Automatic Tuning 1
press
Knob to select the preset station.
Automatic Tuning 2
automatically search the band.
Manual Tuning
press
to tune in to a lower or higher frequency.
Press MONO/ST button to listen in Mono/Stereo.
(This applies only when listening to an FM station.)
•
Each time the button is pressed, the sound switches between "STEREO" and "MONO".
45
•
In a poor reception area, select MONO for a clear, interference-free broadcast.
Press
button or
button to select the preset station.
Press and hold
button
to automatically search the band.
Briefly press
button to
Press the STOP ( ) button
to select PRESET and then
button or turn Multi Jog
Press the STOP ( ) button to
select "AUTO" and then press
button or turn Multi-Jog Knob to
Press STOP ( ) to select
MANUAL and then briefly
or turn Multi Jog Knob
Presetting Stations
You can store up to:
15 FM stations
5 MW stations
or
15 FM stations
5 SW1 stations
5 SW2 stations
Example: Presetting FM 89.1 in the memory
Press the
1
2
TUNER(BAND)
Press
button and select
select "89.10".
the FM band.
•
•
Each time the button is pressed,
Refer to Step 2 on page 41
the band switches between
to automatically or manually
"FM ➝ (SW1,2) ➝MW ".
tune in to a station.
kHz
MHz
4
Press
to
5
Press the TUNER
select preset
MEMORY button.
number.
•
•
You can select between 1 and
Press the TUNER MEMORY button before
'PROGRAM' disappears from the display.
15.
•
'PROGRAM' disappears from the display
and the station is stored in memory.
PROGRAM
kHz
MHz
To tune in to a preset station, press
remote control to select a channel.
15AM stations
3
Press the TUNER
to
MEMORY button.
•
"PROGRAM" flashes in the
display.
PROGRAM
kHz
kHz
MHz
MHz
To preset another
6
station, repeat
steps 2 to 5.
kHz
MHz
on the
46