Advertisement
Quick Links
Magnetic Light
Smart Dimmer Control for Aquascaping
Aquascaping Magnetic Light
Model NO.: P24001MOD Frequency: 50-60Hz
Charger Input: DC5V-2A
© 2025 All Rights Reserved
Quick Start Guide
Congratulations on purchasing your Magnetic Light
Read this guide to get started to installing and setting your lighting
Light
Dimmer Cable
Metal sheet
Wire clip
Viewing Stand
Non-magnetic Objects
Installation to Viewing Stand
Installation to non-magnetic objects
The bulit-in magnet of the lights
First stick the metal sheet on
sticks to the Viewing Stand.
non-magnetic objects such as wood
Put the power supply cord through
and plastic, and insert the connector
the hole on the back of the Viewing
into the lighting fixture. The lighting
Stand before installing the lights.
fixture is close to the metal sheet,
The lights position can be adjusted
and it will be adsorbed on the metal
according to the tank and plants.
sheet by magnetic force.
Metal sheet
Wire clip
Glass Cover
Installation to glass cover
It can be directly on the glass
cover, connected to the power
supply, and you can use and
enjoy your beautiful scenery.
Enjoy your Magnetic Light now!
Advertisement
Summary of Contents for MicMol P24001MOD
- Page 1 Put the power supply cord through and plastic, and insert the connector supply, and you can use and Model NO.: P24001MOD Frequency: 50-60Hz the hole on the back of the Viewing into the lighting fixture. The lighting enjoy your beautiful scenery.
- Page 2 Quick Start Guide Congratulations on purchasing your Magnectic Light Read this guide to get started to installing and setting your lighting Controller Overview Intensity + Connect to Intensity - USB Power Adapter Timer (5V-2A) ON/OFF Timer Setup Blue - 4 hours Green - 6 hours Red - 8 hours Blue + Green - 10 hours...
Need help?
Do you have a question about the P24001MOD and is the answer not in the manual?
Questions and answers