Page 1
Technical Support and E-Warranty Certificate www.vevor.com/support GRAMOPHONE MANUAL MODEL: JBC-01 / JBC-02 / JBC-03 We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to cover all categories of tools offered by us.
Page 2
This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you again if there are any technology or software updates on our product.
Warning-To reduce the risk of injury, user must read instructions manual carefully. PRODUCT PARAMETER Model JBC-01 JBC-02 JBC-03 Input voltage AC100-240V 50/60Hz Output voltage DC5V Power 10 W Number of speaker A speaker Two speaker Two speaker Speaker specification 2" 2Ω 3W 2.5"...
Page 4
Description of panel function Port function description MODE DECLARATION 1. Record mode LED blue light long bright. 2. Bluetooth playback mode (BT) blue light flashing - pairing mode. Blue light on - Pairing successful. 3. AUX IN mode (access to other audio devices to play music) purple light is steady on.
Page 5
OPERATING INSTRUCTIONS 1. Connect the adapter to the DC IN port. 2. Put in the vinyl record and insert the round hole in the middle of the vinyl record into the metal cylinder of the case. 3. Open the record player stick guard.Remove the record player needle cover.
Page 6
4. Turn the stylus lever toward the back of the case, as shown by the circular arrow in the following figure. 5. Turn the stylus lever towards the front knob of the case, as shown by the circular arrow in the following figure. Adjust the speed switch to adjust the turntable to the corresponding speed.
Page 7
6. Turn the knob to increase, decrease and turn off the volume. MODEL: JBC-01 /JBC-03 MODEL: JBC-02 Note: When playing model JBC-03, you need to loosen the screws in the red circle on the right picture by 0.5-1 turns. 45 RPM small record instructions 1.
2. Put the 45 speed small record on the turntable, put the stylus, adjust the speed gear to the appropriate position, adjust the volume to play normally. Bluetooth input function Switch to BT light flashing, search and select Bluetooth name, when connected to Bluetooth.The BT light is on.
Page 9
CHANGE THE NEEDLE Use a fingernail or flake tool to pry open the red plastic cover, so that the stylus falls off, and then fasten the new stylus on according to the card position, and finally press the aluminum arm head and the red plastic cover to fasten.
FAILURE RECOVERY Questions Analysis of causes Countermeasure The input power The power Please insert the DC in interface is not indicator is not on. position plug in place. inserted well. The speed gear is not Please adjust the speed Sound speed or adjusted to the gear to the corresponding abnormal tone.
Page 12
Technical Support and E-Warranty Certificate www.vevor.com/support...
Need help?
Do you have a question about the JBC-01 and is the answer not in the manual?
Questions and answers