Page 1
USER UNDERMOUNT RANGEHOODS M A N U A L WRU52CX-L, WRU52CB-L, WRU75CX-L, WRU75CB-L, WRU90CX-L, WRU90CB-L IMPORTANT: Please ensure that you read through this user manual prior to installation and use. This manual contains important information to ensure optimal performance and keep you safe. Please retain your proof of purchase, as this will be required in the event that you require warranty service.
WARNING & SAFETY INFORMATION This appliance is not intended for use by persons The minimum distance between the hob surface (including children) with reduced physical, sen- and the lowest part of the rangehood is 600mm. sory or mental capabilities, or lack of experience This disance shall be at least 650mm, if the range- and knowledge, unless they have been given hooh is installed over a gas hob.
MAINTENANCE & TROUBLESHOOTING GENERAL MAINTENANCE Ensure that the power to the unit is switched off prior to cleaning the unit. The surface should only be cleaned with warm soapy water and a soft non-abrasive cloth. In coastal environments and humid areas more frequent cleaning is required to maintain the finish.
INSTALLATION & DUCTING all dimensions in mm *Bevelled edge, 520 Model only IMPORTANT: Before handling the rangehood during the installation, it is recommended that you remove the filter to prevent damage. The image to the left, illustrates the minimum height from the hob surface to the underside of the rangehood.
Page 7
INSTALLATION & DUCTING DUCTED OPTION NOTICE: ALL DUCTING MATERIAL MUST BE COMPLIANT WITH THE LOCAL LAWS IN FORCE. INSTALLATION Remove the filter and light globes. (If installed) Remove the stainless steel fascia (2 screws) - take care not to damage the fascia. Determine the most effecient path for the ductwork, minimise bends and keep the length of the ductwork to a minimum.
CONTACT p: 1300 762 219 e: arisit@arisit.com We are committed to ongoing research and development. Every effort has been made to ensure all information in the user manual is correct at time of going to print. Dimensions should be used as a reference only and actual dimensions should be taken from the physical product.
Need help?
Do you have a question about the WRU52CX-L and is the answer not in the manual?
Questions and answers