Samsung VP-DC563 Owner's Instruction Book page 41

DVD Camcorder: Before Recording
When using a New Disc: Formatting a New Disc
Formatting may be required if a new disc is inserted.
Recognition of the disc will start.
For a DVD-R/+R DL disc: Formatting will automatically begin.
For a DVD-RW disc: You are prompted with the <Disc is not formatted. Format?> message.
Video (Video Mode) : If the disc has been fi nalised, you will be able to
play the disc on most DVD Players/Recorders.
Differences between
Video and VR mode
VR (VR Mode) : You can edit the disc on a DVD Camcorder, but
playback is only possible on a DVD Recorder that supports VR mode.
Move the [Joystick] left or right to select <Video> or <VR>, then press [Joystick(OK)].
 Please refer to Page 11 for disc type descriptions and usage.
 Upon completion, the <Complete!> message will appear.
 If you select <Cancel>, the <Not formatted!> warning message will appear.
Formatting a new disc is required to record on it. To format later, use the <Disc Manager>
menu. page 78
For a DVD+RW disc: You are prompted with the <Disc format? All fi les will be deleted!> message.
Move the [Joystick] left or right to select <Yes>, then press [Joystick(OK)].
 Upon completion the <Complete!> message will appear.
 If you select <No>, the <Not formatted!> warning message will appear.
Formatting a new disc is required to record on it. To format later, use the <Disc Manager> menu. page 78
Removing a Disc
1. Push the [OPEN] switch in the direction of the arrow.
 The disc cover will partially open.
2. Gently open the cover the rest of the way by hand.
3. Remove the disc.
 While pushing down the centre portion of the disc spindle, pick up the disc by the edges to remove.
4. Gently push the section marked [PUSH CLOSE] on the disc cover to close it.
Note
The Finalise/Format functions are not available at battery level
 Refer to page 12 for Finalised disc compatibility.
and .
ENGLISH
SP
Disc is not formatted.
Format?
Video VR Cancel
<When a DVD-RW disc is formatted.>
41