SECURITY SYSTEM PULSON ALARM 2.0 4G QUICK USER MANUAL PulsON LCD/C PulsON LCD/T In order for the system to operate – arm/disarm, access to the user menu, etc. you need to enter the correct access code (user code). The manipulator will verify the level of permissions and allow you to manage the sys- tem.
SECURITY SYSTEM PULSON ALARM 2.0 4G PARTITION SCREEN Detailed information on the infringed detection lines is visible on the partition screen. To access the partitions screen, log in to the keypad using the PARTITION 1 user code, then press and hold the down arrow (key 0) for 2 seconds to scroll through the screen to the desired partition.
Page 5
SECURITY SYSTEM PULSON ALARM 2.0 4G BROWSING THE STATE OF SYSTEM READINESS Enter the user code and press the 0 or 2 key for 2 seconds. The up-down arrow keys can be scrolled with further information about the state of partition, lines and readiness for arming.
Need help?
Do you have a question about the PulsON Alarm 2.0 4G and is the answer not in the manual?
Questions and answers