Advertisement
Quick Links
Advertisement
Related Manuals for teko Hover Scrubber Omni
Summary of Contents for teko Hover Scrubber Omni
- Page 1 Hover Scrubber OMNI u s e r g u i d e CONTACT CUSTOMER CARE 1+(619)449-2392...
-
Page 2: What You Get
W H AT YOU G E T: PARTS FOR YOUR HOVER SCRUBBER OMNI Handle with on/off button Baseboard dusting cloth Power wedge microfiber pad (x2) Top aluminum pole Bottom aluminum pole Power wedge scrubbing pad Main body Power wedge base Charger Chenille pads (x2) Baseboard magnetic attachment... - Page 3 Wahoo! Congratulations on your purchase Quick Start Guide: of our best Hover Scrubber model ever! Step 1 Step 2 Fully charge the unit prior to using. Plug Assemble the unit by connecting the power adapter into an outlet, then the pieces based on the matching plug into the charge port of the main stickers: A to A, B to B and C to C.
-
Page 4: Assembly Guide
Assembly Guide: A detailed guide to assembly Step 1 Assemble the main unit click metal pin metaI pin click Connect handle and Connect the top Connect the main body top aluminum pole by aluminum pole and bottom to the bottom aluminum pressing in the metal pin aluminum pole. -
Page 5: Usage Guide
Assembly Guide: A detailed guide to assembly Step 3 Attachments snap power wedge base into underside “fins” magnets shown with attached shown with attached shown with pads power wedge base baseboard duster Power wedge base Attach desired pads to To attach the baseboard -attach the power wedge the underside of the main duster, align the magnets to... -
Page 6: Care Instructions
Use dry. Troubleshooting: Just in case... The Hover Scrubber Omni rotates slowly or stops working. The battery is low or drained and needs to be recharged. Pressing down too hard-try decreasing pressure. The safety circuit breaker tripped-simply turn the unit off, wait 30 seconds and turn the unit back on. - Page 7 Troubleshooting: Just in case... Unit will not turn on. Check the connection between the top aluminum pole & bottom aluminum pole to make sure they are fitted tightly together and there is no gap. Ensure there is a proper electrical connection by confirming that the handle is connected to the top pole and the main unit is connected to the bottom pole.
-
Page 8: Limited One-Year Warranty
(1) year from the date of original purchase. If within one (1) year this product fails due to defect in material or workmanship, Teko will repair, replace or supply any defective part at their option.
Need help?
Do you have a question about the Hover Scrubber Omni and is the answer not in the manual?
Questions and answers
The indicator light doesn't illuminate
The indicator light on the Teko Hover Scrubber Omni may not be illuminating due to the following reasons:
1. Improper Assembly – Ensure that the protective unit is properly locked into place and that all parts are securely connected.
2. Charging Issues – Verify that the charging port is accessible and properly connected to a power source. The indicator light should flash red while charging and turn solid green when fully charged.
3. Power Connection – Check if the power wedge and pads are correctly attached to the base to ensure proper functionality.
4. Defective Unit – If the device is correctly assembled and charged but the light still does not turn on, there may be a defect in the product. If this is the case, contact customer care for assistance.
For further troubleshooting, users can reach out to Teko customer support via phone or email.
This answer is automatically generated