Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for MechMaxx EFS48
- Page 1 WARRANTY Operator’s Manual www. mechmaxx.com...
-
Page 3: Table Of Contents
ADJUSTING THE HEIGHT FLAIL MOWER ADJUSTMENT REGULATING THE TENSION OF DRIVING BELT STARING UP SERVICE AND MAINTENANCE SERVICE MAINTENANCE SEASON MAINTENANCE ANNUALLY MAINTENANCE STORAGE OPERATION AFTER STORAGE ILLUSTRATED PARTS CATALOGUE EFS FLAIL MOWER PARTS LIST www. mechmaxx.com TABLE OF CONTENTS... -
Page 4: Specifications
SPECIFICATIONS Model EFS48 EFS60 EFS65 Tractor HP 15-35 HP 13-35 HP 30-60 HP Working Width 48 in 60 in 65 in T5-LF-31.5’’ with shear bolt 31-1/2’’/ 43’’ PTO Shaft 04B-LF-800 with shear bolt 31-1/2’’/ 43’’(EFS65) 540 r/min PTO Turning Speed Cutting Height Range 0.7 –... -
Page 5: Safety Signs
Keep clear FLYING OBJECTS HIGH PRESSURE FLUID HAZARD HAZARD Relieve pressure before disconnecting lines. Keep clear. Do Not use hands to check for leaks. ROTATING Consult physician immediatly if skin BLADES penetration occurs. KEEP HANDS AWAY www. mechmaxx.com SAFETY SIGNS... -
Page 6: Safety First
The machine shall be operated in the recommended speed. Don't stay between the tractor and the machine. Don't start the machine in a closed place (due to the smoke from the tractor). www. mechmaxx.com SAFETY... -
Page 7: Specifications
The Flail mower attaches to the 3 point hitch on the tractor. MAIN COMPONENTS OF THE FLAIL MOWER 1. Blade axle 2. Blade axle cover 3. Combined fender 4. Gear box assembly 5. Suspension bracket 6. Transmission shaft 7. Belt wheel and belt www. mechmaxx.com SPECIFICATIONS... -
Page 8: Operation
Keep the Note in rough or lumpy paddocks the clearance needs to output of the tractor at 540 RPM. be increased to ensure that the blades dont impact the ground in operation. www. mechmaxx.com OPERATION... -
Page 9: Regulating The Tension Of Driving Belt
• Oil level of gear. the machine. • Point of lubrication • All bolts, nuts and screws. When transferring the moving state of the machine to the working state, do not stand between the machine and the tractor. www. mechmaxx.com OPERATION... -
Page 10: Service And Maintenance
• The oil shall be drained off after 50 hours of using time. sleeve shall be used to replace the worn fixing parts on Then the oil shall be drained off every 250 hours. One the blade. time every year at least. www. mechmaxx.com SERVICE AND MAINTENANCE... -
Page 11: Storage
Check all tightening parts and replace them if necessary. Don't remove the protective parts on some points and protect the machine. www. mechmaxx.com SERVICE AND MAINTENANCE... -
Page 12: Illustrated Parts Catalogue
Always give your dealer the Model of your machine to assist him in ordering and obtaining the correct parts. Use the exploded view and tabular listing of the area of interest to exactly identify the required part. www. mechmaxx.com ILLUSTRATED PARTS CATALOGUE... -
Page 13: Efs Flail Mower Parts List
Bolt M10*40 grease nipple paper gaset skids Bolt M8*40 low pin breath bolt bushing Transmission shaft R Pin Bolt stand foot weldment Bolt M8*40 shaft bolt M8*25 bearing cover plate circlip 62 clip www. mechmaxx.com EFS FLAIL MOWER PARTS LIST... - Page 14 (left) Fender shaft bar for fender fender fender (right) bearing protection bearing ring for grass rotor weldment Bolt M12*1.5*50 hammer locking nu M12*1.5 Bolt M8*20 pipe for grease grease nipple small pulley www. mechmaxx.com EFS FLAIL MOWER PARTS LIST...
- Page 16 13920 CITY CENTER DR.STE 235 CHINO HILLS，CA 91709, United States...
Need help?
Do you have a question about the EFS48 and is the answer not in the manual?
Questions and answers
Does the transmission shaft require oil and, if so, how much?