Summary of Contents for Safehold 40401
- Page 1 Hand Winch Instruction Manual Models of device covered 40401/40408 Read and understand instructions before using this equipment Do not throw instructions away Designed in the UK SHUM-048 Iss.01...
- Page 2 Contents User must read, understand and observe these instructions for use. 9-11 12-14 Setup and use Specifications Operation and use About & Warning General Use 19-20 Labelling Inspection Technical Data Safe use Service Log Table and warnings 21-22 23-33 Warranty Appendix B confined space suppliment...
-
Page 3: General Use
If in doubt, product that visual device is permitted for man consent. Any repair shall only be contact Safehold Ltd. for advice. deformities, been subjected to a riding providing correct made by the manufacturer. fall, deterioration or unusual wear... -
Page 4: General Features And Specifications
Slotted handle RISK STATEMENT - PPE INSTALLATION • Protected gear drive This winch is designed to prevent The Safehold winch should always • Covered brakes falls from height when used for be installed by a competent and • Automatic load actuated brake lifting and lowering of personnel trained person. - Page 5 To facilitate this a raised or lowered (potentially in number of Safehold approved fall 40401/40408 - Hand Winch with mounting bracket kit a confined space), the top man arrest and rescue equipment can operating winching/rescue be connected to the tripod.
- Page 6 If the device is to be used event of a fall the user can be as a primary man riding winch rescued via the winching facility. Safehold recommend the use of For advice or further information a secondary rescue device. The contact Safehold.
-
Page 7: Operation And Use
•Never attempt to repair or service unless trained and authorized by Always consider the loads centre Safehold and never use any other parts other than Safehold genuine of gravity and do not snatch lift at lower material up to a WLL of replacements. - Page 8 1 x Safehold RTFA-R (31001) Only trained and competent people can service and maintain this winch 1 x Safehold Work Winch (40401) outside of basic inspection and lubrication. Wire rope changes are The winch is your primary lowering device and in the event of a fall the permitted providing the specification of rope is correct.
-
Page 9: Technical Data
SAFE USE TECHNICAL DATA BEFORE LIFTING OR PULLING A LOAD, THE FOLLOWING MUST BE CHECKED: 250kg FOR GOODS – 140kg FOR •Cable inspected and found to be in good condition. PERSONNEL (SINGLE USER ONLY) •The device anchored securely. ROPE DIA •Load is not greater than the WLL on the winch. -
Page 10: Service Log
SERVICE LOG Labelling: Safehold LTD www.safe-hold.com See below for the a typical winch label. All labels on the Winch must be Model #: User: present and fully legible. Date of first use: Serial No: Date of manufacture: Pass Fail Date... - Page 11 Product Warranty and Warnings SERVICE LOG One Year Limited Warranty Safehold LTD www.safe-hold.com Model #: User: The Company makes every effort to assure that its products meet high Date of first use: Serial No: quality and durability standards and extends the following warranty to the...
- Page 12 6.This warranty shall not apply to this product if it has been fitted with or repaired with parts, components or items not supplied or approved by the Company or which have been modified or altered. 7.The Company limits all implied warranties to the period specified above from the date the product was purchased by the Customer.
- Page 18 www.safe-hold.com...
Need help?
Do you have a question about the 40401 and is the answer not in the manual?
Questions and answers