6_LW15E13C-Body18p.fm Page 24 Wednesday, August 8, 2001 4:14 PM
PowerSaver
This monitor has a built-in power management system called PowerSaver. This system saves
energy by switching your monitor into a low-power mode when it has not been used for a
certain period of time. The available modes are "On", "Standby", "Sleep", and "Deep Sleep".
PowerSaver operates with a VESA DPMS compliant video card installed in your computer. You
use a software utility installed on your computer to set up this feature. See Table 2 below for
details.
Table 2. Power-saving modes
State
Horizontal Sync
Active
Vertical Sync
Active
Power
Green
Indicator
LW15E13C :
Power
40W (Max.)
Consumption
LW17E14C :
52W (Max.)
NOTE: This monitor automatically returns to normal operation when horizontal and vertical
sync return. This occurs when you move the computer's mouse or press a key on the
keyboard.
This monitor is EPA E
NERGY
with a computer equipped with VESA DPMS functionality.
For energy conservation, turn your monitor OFF when you are not using it or when leaving it
unattended for long periods.
Appendix
Power-Saving Function mode
Normal
Operation
Standby Mode
Inactive
Active
Amber
Less than 3W
®
S
compliant and NUTEK/ENERGY2000 compliant when used
TAR
English
(EPA/ NUTEK/ ENERGY2000)
Sleep Mode
Deep Sleep Mode
Position A1
Position A2
Active
Inactive
Inactive
Inactive
Amber Blinking
Amber Blinking
(0.5 sec interval)
(1 sec interval)
Less than 3W
Less than 3W
24