Auto Wall-Mount Adjustment (Sold Separately) - Samsung LN-T466F Owner's Instructions Manual

Auto Wall-mount Adjustment
Once the auto wall mount is installed, the position of your TV can be easily adjustable.
TV Rear Panel
Ex-lInK Cable (not supplied)
Entering the menu
. Press the mEnU button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the EnTER button.
. Press the ▲ or ▼ button to select "Wall-Mount Adjustment",
then press the EnTER button.
. Adjust to the desired position using the ▲,▼,◄,► buttons.
. Press the ExIT button to exit.
If you press an arrow button when no OSD is displayed on the TV screen,
the Adjustment screen appears.
When you turn the power off, your TV moves to the initial installation position.
When you turn the power on, your TV moves to the last adjusted position.
Using the Remote Control buttons
button
Wall-mount angle
adjustment
Reset
Remembering the
position and moving
to the remembered
position
green
red button yellow
button button
For installation, refer to the Installation Manual provided with the wall mount.
For product installation and the installation and moving of the wall mount, make sure to consult a
specialized installation company.
This installation manual is to be used when attaching the wall mount to a wall.
When attaching to other building materials, please contact your nearest dealer
(Sold separately)
Operations
Tilt Up, Tilt Down, Move right, Move left
Moves to the initial installation position
1. Select the Direction buttons of the remote control.
2. Press the red button (Select Position 1).
3. Adjust the set to a desired position following the wall mount owner's
manual.
4. The position you adjusted last is memorized as Position 1.
5. By using the green button (Select Position 2) and the yellow button
6. You can save 3 respective positions. To the red button (Select Position 1),
7. If you additionally move the set from a saved position, the last position is
Auto Wall-mount
(Select Position 3), you can save positions according to the procedures
above.
green button (Select Position 2) and yellow button (Select Position 3).
If you press a button after saving, the set automatically moves to that
saved angle.
saved.
English - 
TV Setup
▲ more
Film Mode : Off
Wall-mount Adjustment
PIP
Function help : Off
SW Upgrade
move Enter
Wall mount Adjusment
Position
Position   
Adjust Center Exit
InFO
►
►
►
►
►
Return