Karlsson RETRO RADIO KA5719 Instruction Manual

EN | INSTRUCTION
1. Power input
2. Back-up battery cover
3. Battery compartment
4. SET
5. UP
6. DOWN
7. Aerial
8. FM
9. VOL+
10. SCAN
11. VOL-
12. Hour/year Display
13. Temperature/Day-Month Display
14. Charging cable
Read this manual carefully and retain
for future reference.
Product description
This wooden radio shows the time, date and ambient
temperature, and allows you to listen to your favourite radio
programmes at any hour of the day.
This kit contains
• 1 wooden alarm clock
• 1 CR2032 back-up battery
• 1 USB charging cord
Details:
• Input: DC 5 V
• Power supplied by standard USB port
and/or 4 AAA, 1,5V
• Maximum ambient temperature for use: 25
Functions
•
Display showing perpetual calendar (2000-2099),
time, and date
•
Thermometer: display in C (0~50) or F (32~122)
•
Choice of 12 or 24 hour clock
• Energy saving function
Cleaning and storage
Clean the device using a soft, dry cloth.
Do not use detergent as this may damage the device.
-1 wooden alarm clock
-1 CR2032 back-up battery
-1 USB charging cord
MANUAL |
ALARM
Details:
-Input: DC 5 V
-Power supplied by standard USB port and/or 4 AAA, 1,5V
-Maximum ambient temperature for use: 25
Functions
-Display showing perpetual calendar (2000-2099), time, and date
-Thermometer: display in ° C (0~50) or ºF (32~122)
-Choice of 12 or 24 hour clock
-Energy saving function
Start-up:
Power, battery insertion and replacement.
-USB Power supply
-Insert the plug on cable (14) into the power input port (1) then connect the oth
standard USB port on a computer.
-Battery power supply
-Open the battery compartment (3) and insert 4 AAA LR03 1.5 V batteries, taking
polarity as indicated.
-Close the battery compartment.
-Replacing the back-up battery.
-Open the battery compartment (3) and remove the AAA batteries if necessary.
-Open the back-up battery cover (2) using a screwdriver.
-Remove the old battery and insert a CR2032 battery, taking care to follow the pol
-Close the cover and the battery compartment.
CLOCK
RETRO RADIO KA5719
Start-up
Power, battery insertion and replacement.
•
USB Power supply
•
Insert the plug on cable (14) into the power input
port (1) then connect the other end of the cable to
a standard USB port on a computer.
•
Battery power supply-Open the battery
compartment (3) and insert 4 AAA LR03 1.5 V
batteries, taking care to follow the polarity as indicated.
• Close the battery compartment.
• Replacing the back-up battery.
•
Open the battery compartment (3) and remove the
AAA batteries
•
Open the back-up battery cover (2) using a
screwdriver.
•
Remove the old battery and insert a CR2032
battery, taking care to follow the polarity indicated.
•
Close the cover and the battery compartment.
-Press the UP (5) or DOWN (6) bu
alarm clock mode (12) will flash.
-Press the UP (5) or DOWN (6) butt
to confirm, next the alarm hour (12
-Press the UP (5) or DOWN (6) bu
alarm minutes (12) will flash.
-Press the UP (5) or DOWN (6) butt
-Alarm Mode
-Press the FM button (8) to deactiv
-Radio Mode
-Press the FM button (8) to activate
-Press the SCAN button (10) to ski
-Press the VOL + ( 9 ) or VOL -(11)
Adjusting temperature mode °
-Press UP (5) button to change to °
-Press UP (5) button again to rever
Adjusting display
-Press the SET (4) button and the D
-Press the SET (4) button again to c
Adjusting energy saving mode
-This mode allows you to turn off
to save energy.
-Press the DOWN (7) button to act
deactivate it.
Notes:
It is not possible to make adjustme
Warnings while using produ
Do not use any cable apart from th
Take care not to open, modify or
electric shock or fire. In the event o
Keep the device protected from rai
Do not allow the device to come
dispose of in fire or flames.
Cleaning and storage:
if necessary.
Clean the device using a soft, dry c
Do not use detergent as this may d
Note about disposal:
When no longer usable
electronic equipment w