Wall-Mount Adjustment (Ln-T4042H ,Ln-T4642H); Sold Separately - Samsung LN-T2642H Owner's Instructions Manual

wall-mount adjustment (ln-t0h ,ln-t6h)
Once the wall mount is installed, the position of your TV can be easily adjustable.
tV rear panel
Entering the menu
. Press the mEnu button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the EntEr button.
. Press the ▲ or ▼ buttons to select "Wall-Mount Adjustment",
then press the EntEr button.
. Adjust to the desired position using the ▲,▼,◄,► buttons.
. Press the ExIt button to exit.
If you press an arrow button when no OSD is displayed on the TV screen,
the Adjustment screen appears.
When you turn the power off, your TV moves to the initial installation position.
W hen you turn the power on, your TV moves to the last
remembered position you adjusted.
using the remote Control Buttons
Button
green
red button yellow
button button
For installation, refer to the Installation Manual provided.
For p roduct installation and the installation and moving of the wall mount, make sure to consult a specialized
installation company.
This i nstallation manual is to be used when attaching the wall mount to a wall.
When attaching to other building materials, please contact your nearest dealer
Ex-lInK Cable (not supplied)
Operations
Wall-mount angle adjustment Tilt Up, Tilt Down, Move right, Move left
Reset
Remembering the position
and moving to the
remembered position
auto wall-mount
Moves to the initial installation position
1. Select the direction buttons of the remote control.
2. Press the red button (Select Position 1).
3. A djust the set to a desired position following the wall mount
operating procedures.
4. T he position you adjusted last is memorized as Position 1.
5. B y using the green button (Select Position 2), and the yellow
button (Select Position 3), you can save positions according to the
procedures above.
6. Y ou can save 3 respective positions to the red button (Select
Position 1), green button (Select Position 2), and yellow button
(Select Position 3).
If you press a button, the set automatically moves to that saved
angle.
7. I f you additionally move the set from a saved position, the last
position is saved as the "final position".
English - 6

(Sold separately)

▲More
tV
film mode : off
wall-mount adjustment
PIP
function help : off
Sw upgrade
move
wall-mount adjusment
position
position  
adjust Center
Info
Setup
►
►
►
►
►
Enter return

Exit