Page 1
Masterclass AA CD PLAYER (January 2006) Instruction Manual Designed and manufactured by J E Sugden & Co LTD Valley Works Station Lane HECKMONDWIKE West Yorkshire WF16 0NF ENGLAND www.sugdenaudio.com Masterclass AA Compact Disc Player...
Switches mains power on and off ANALOGUE OUTPUT For connection to a Sugden amplifier or other suitable unit. The output sockets are standard RCA phono with RIGHT at the top and LEFT at the bottom. A pair of balanced outputs supply a balanced signal for connection to a suitable balanced input.
PLAY Starting play or returning to the beginning of the track. STOP Stopping play. PREVIOUS & NEXT Selecting another track during play or selecting a track to start play with. STANDBY Turns the power on/off for all digital circuits and display only. Mains power switch at rear of unit (rear panel layout).
To operate the remote control with your player first select CD at the top of the RC. As the Sugden RC is a universal design it has the facility to operate compatible amplifiers and stereo tuner with similar coding.
If in doubt consult your local dealer or our distributor for assistance. All fuses used in Sugden equipment have the specification on them. NEVER bypass any fuse in your amplifier. NEVER replace a fuse with one of a different specification or value.
Page 6
Masterclass AA CD Specification @ 230Volts setup. Max Power Consumption 53 Watts Cycle 50/60 Hz AC Fuse Rating T 1 AMP Analogue Output 1.55 V r.m.s Digital Output 500mV Pk to Pk Frequency Response 20Hz to 20kHz -0.25dB Signal to Noise Ratio >80dB...
Need help?
Do you have a question about the Masterclass AA and is the answer not in the manual?
Questions and answers