1. Manuals
  2. Brands
  3. NEO Manuals
  4. Lighting Equipment
  5. BLINDER ARRAY FC
  6. User manual

NEO BLINDER ARRAY FC User Manual

Two-eyed audience cube
Hide thumbs

Advertisement

Table of Contents

BLINDER ARRAY FC
TWO-EYED AUDIENCE CUBE
USER MANUAL | MANUAL DE USUARIO
PLEASE READ THE INSTRUCTIONS CAREFULLY BEFORE USE
POR FAVOR LEA LAS INSTRUCCIONES ANTES DE USAR
P. 1
English Version | NEO-BLINDER ARRAY FC

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the BLINDER ARRAY FC and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for NEO BLINDER ARRAY FC

Summary of Contents for NEO BLINDER ARRAY FC

  • Page 1 BLINDER ARRAY FC TWO-EYED AUDIENCE CUBE USER MANUAL | MANUAL DE USUARIO PLEASE READ THE INSTRUCTIONS CAREFULLY BEFORE USE POR FAVOR LEA LAS INSTRUCCIONES ANTES DE USAR P. 1 English Version | NEO-BLINDER ARRAY FC...

  • Page 2: Safety Instructions

    Before installation, ensure that the voltage and frequency of power supply match the power requirements of the fixture. It is essential that each projector is correctly earthed and that electrical installation conforms to all relevant standards. P. 2 English Version | NEO- BLINDER ARRAY FC...
  • Page 3 There is no user serviceable parts inside the projector, do not open the housing and never operate the fixture with the covers removed. If you have any questions, don’t hesitate to consult your dealer or manufacturer. LAMP STRUCTURE AND INSTALLATION P. 3 English Version | NEO-BLINDER ARRAY FC...
  • Page 4 It will affect signal transmission and cause the system to shut down. ● When the machine power to a unit is disconnected, the DMX output and input connections are bypassed. P. 4 English Version | NEO- BLINDER ARRAY FC...
  • Page 5 001-022 24CH 001-024 28CH 001-028 33CH 001-033 (Refer to the picture above) The number of lamps added after the fourth one; the address code is based on the channel, and so on. P. 5 English Version | NEO-BLINDER ARRAY FC...

  • Page 6: Cable Connection

    C. DMX input: IP68 3-core DMX IN waterproof signal line input D. DMX output: IP65 3-core DMX OUT waterproof signal line output E. IP65 USB port for firmware updates F. Safety hook G. The panel function operations are as follows: P. 6 English Version | NEO- BLINDER ARRAY FC...
  • Page 7 2 CH DWE 4 CH DWE 9CH DWE+ 6CH STROBE 6CH RGB 10CH BASIC RGB 14CH BASIC RGB 13CH STANDARD RGB 22CH STANDARD RGB 24CH EXTENDED RGB 24CH EXTENDED RGB 10CH DIRECT P. 7 English Version | NEO-BLINDER ARRAY FC...
  • Page 8 Turn off color macros Dimming color macro Light up quickly Dimming STROBE GREEN BLUE AMBER WHITER Color Temperature Dimming strobe Color temperature Reddish green Custom color Color1 P. 8 English Version | NEO- BLINDER ARRAY FC...
  • Page 9 Automatically lock screen startup mode Self-propelled Light up quickly signal hold Keep black field Zenryo dimming curve Linear index logarithm S curve Dimming delay Medium Halogen DTW Consecrate white balance white balance user defined P. 9 English Version | NEO-BLINDER ARRAY FC...
  • Page 10 2. Parameters that can be transferred from the host when multiple lamps are synchronously controlled include: DMX channel mode, display setting status, operation mode status (including user program data). When transferring parameters, please set this machine as the host, and other machines Set as slave P. 10 English Version | NEO- BLINDER ARRAY FC...

  • Page 11: Dmx Channel Table

    Dimmer 2 Color Macro Blue Red 2 Color Macro Blue Fine Green 2 Crossfade Device Settings Blue 2 Tint CTC (all) Color Marco Tint (all) Color Macro Crossfade Device Settings Device Settings P. 11 English Version | NEO-BLINDER ARRAY FC...
  • Page 12 CTC (all) Effect Red 2 Fine Tint (all) Dimmer Curve Green 2 Device Settings Dimmer Response Green 2 Fine Redshift Blue 2 Device Settings Blue 2 Fine CTC 2 Tint 2 P. 12 English Version | NEO- BLINDER ARRAY FC...
  • Page 13 Dimmer 2 Amber 1 Fine CTC (all) Red 2 White 1 Tint (all) Green 2 White 1 Fine Device Settings Blue 2 CTC 1 Amber 2 Tint 1 White 2 Color Macro 1 P. 13 English Version | NEO-BLINDER ARRAY FC...
  • Page 14 Blue 2 Fine Amber 2 Amber 2 Fine White 2 White 2 Fine CTC 2 Tint 2 Color Macro 2 Color Macro Crossfade 2 Effect Dimmer Curve Dimmer Res- ponse Redshift Device Settings P. 14 English Version | NEO- BLINDER ARRAY FC...
  • Page 15 No Function - Current Preset from Menu Settings 064-127 LED / fast 128-191 Medium 192-255 Halogen / slow Redshift 000-084 No Function - Current Preset from Menu Settings 085-170 Redshift Off 171-255 Redshift On P. 15 English Version | NEO-BLINDER ARRAY FC...
  • Page 16 Strobe 8: random burst pulse (fast slow) 205-209 Shutter open 210-224 Strobe 9: sine wave (fast slow) 225-229 Shutter open 230-244 Strobe 10: burst (fast slow) 245-255 Shutter open 000-255 0-100% Green 000-255 0-100% Blue 000-255 0-100% P. 16 English Version | NEO- BLINDER ARRAY FC...
  • Page 17 No Function - Current Preset from Menu Settings 064-127 LED / fast 128-191 Medium 192-255 Halogen / slow Redshift 000-084 No Function - Current Preset from Menu Settings 085-170 Redshift Off 171-255 Redshift On P. 17 English Version | NEO-BLINDER ARRAY FC...
  • Page 18 Strobe 9: sine wave (fast slow) 225-229 Shutter open 230-244 Strobe 10: burst (fast slow) 245-255 Shutter open Duration 000-255 only affects to channel 2 - Strobe 1 025-064 Dimmer1 000-255 0-100% Dimmer2 000-255 0-100% P. 18 English Version | NEO- BLINDER ARRAY FC...
  • Page 19 (please see detailed CTC chart) 6CH RGB Function Value Setting Red 1 000-255 0-100% Green 1 000-255 0-100% Blue 1 000-255 0-100% Red 2 000-255 0-100% Green 2 000-255 0-100% Blue 2 000-255 0-100% P. 19 English Version | NEO-BLINDER ARRAY FC...
  • Page 20 Strobe 8: random burst pulse (fast slow) 205-209 Shutter open 210-224 Strobe 9: sine wave (fast slow) 225-229 Shutter open 230-244 Strobe 10: burst (fast slow) 245-255 Shutter open 000-255 0-100% Green 000-255 0-100% Blue 000-255 0-100% P. 20 English Version | NEO- BLINDER ARRAY FC...
  • Page 21 No Function - Current Preset from Menu Settings 064-127 LED / fast 128-191 Medium 192-255 Halogen / slow Redshift 000-084 No Function - Current Preset from Menu Settings 085-170 Redshift Off 171-255 Redshift On P. 21 English Version | NEO-BLINDER ARRAY FC...
  • Page 22 LED Frequency 25KHz (hold 3s) 170-174 No function 175-179 Fan Auto (hold 3s) 180-184 Fan Silent (hold 3s) Fan Off (hold 3s) 185-189 190-194 Fan High Power (hold 3s) 195-199 No function P. 22 English Version | NEO- BLINDER ARRAY FC...
  • Page 23 DMX 250 245-249 User Reset (hold 3s) / Reset only starts if Shutter channel is set to DMX 250 / no self test by DMX 250-255 No function P. 23 English Version | NEO-BLINDER ARRAY FC...
  • Page 24 Shutter open 230-244 Strobe 10: burst (fast slow) 245-255 Shutter open 000-255 0-100% Red Fine 000-255 0-100% Green 000-255 0-100% CTC (affects RGB) 000 - 004 2900K Green Fine 000-255 0-100% P. 24 English Version | NEO- BLINDER ARRAY FC...
  • Page 25 No function fade (Transition 006-105 0,1s - 10s (0,1s steps) Time between Color Macros) 106-214 11s - 119s (1s steps) 215-244 2m - 4m50s (10s steps) 245-255 5m - 15m (1m steps) P. 25 English Version | NEO-BLINDER ARRAY FC...
  • Page 26 No function 175-179 Fan Auto (hold 3s) 180-184 Fan Silent (hold 3s) 185-189 Fan Off (hold 3s) 190-194 Fan High Power (hold 3s) 195-199 No function 200-214 Invert Mapping Off (hold 3s) P. 26 English Version | NEO- BLINDER ARRAY FC...
  • Page 27 Shutter channel is set to DMX 250 245-249 User Reset (hold 3s) Reset only starts if Shutter channel is set to DMX 250 / no self test by DMX 250-255 No function P. 27 English Version | NEO-BLINDER ARRAY FC...
  • Page 28 230-244 Strobe 10: burst (fast slow) Dimmer 1 000-255 0-100% Red 1 000-255 0-100% Green1 000-255 0-100% Blue1 000-255 0-100% Dimmer 2 000-255 0-100% Red 2 000-255 0-100% Green2 000-255 0-100% P. 28 English Version | NEO- BLINDER ARRAY FC...
  • Page 29 182-182 5600K 226-226 6500K 227-255 6621K-10.000K linear in 120-121K steps (please see detailed CTC chart) Tint no function (affects CTC and 000-127 Magenta -> Neutral RGB) 128-128 Neutral 129-255 Neutral -> Green P. 29 English Version | NEO-BLINDER ARRAY FC...
  • Page 30 215-219 Invert Mapping On (hold 3s) 220-224 No function 225-229 LED Mode - Illumination (hold 1,5s) 230-234 LED Mode - Boost (hold 1,5s) 235-239 No function 240-244 Factory Reset (hold 3s) P. 30 English Version | NEO- BLINDER ARRAY FC...
  • Page 31 245-249 User Reset (hold 3s) 250-255 No function P. 31 English Version | NEO-BLINDER ARRAY FC...
  • Page 32 Shutter open Dimmer 1 000-255 0-100% Dimmer 1 Fine 000-255 0-100% Red 1 000 - 004 2900K Red Fine1 000-255 0-100% Green 1 000-255 0-100% Green Fine1 000-255 0-100% Blue1 000-255 0-100% P. 32 English Version | NEO- BLINDER ARRAY FC...
  • Page 33 000-004 5600K (affects RGB 1+2) 005-182 2000K-6500K linear in 20-21K steps (please see detai- led CTC chart) 182-182 5600K 226-226 6500K 227-255 6621K-10.000K linear in 120-121K steps (please see detailed CTC chart) P. 33 English Version | NEO-BLINDER ARRAY FC...
  • Page 34 LED Frequency 25KHz (hold 3s) 170-174 No function 175-179 Fan Auto (hold 3s) 180-184 Fan Silent (hold 3s) 185-189 Fan Off (hold 3s) 190-194 Fan High Power (hold 3s) 195-199 No function P. 34 English Version | NEO- BLINDER ARRAY FC...
  • Page 35 No function 225-229 LED Mode - Illumination (hold 1,5s) 230-234 LED Mode - Boost (hold 1,5s) 235-239 No function 240-244 Factory Reset (hold 3s) 245-249 User Reset (hold 3s) 250-255 No function P. 35 English Version | NEO-BLINDER ARRAY FC...
  • Page 36 000-255 0 - 100% (0ms - 510ms) Dimmer 1 000-255 0 - 100% Red 1 000-255 0 - 100% Green 1 000-255 0 - 100% Blue 1 000-255 0 - 100% P. 36 English Version | NEO- BLINDER ARRAY FC...
  • Page 37 No function fade (Transition 006-105 0,1s - 10s (0,1s steps) Time between Color Macros) 106-214 11s - 119s (1s steps) 215-244 2m - 4m50s (10s steps) 245-255 5m - 15m (1m steps) P. 37 English Version | NEO-BLINDER ARRAY FC...
  • Page 38 Logarithmic Dimmer Curve (hold 1,5s) 080-084 S-Curve Dimmer Curve (hold 1,5s) 085-089 No function 090-094 LED (Fast) Dimmer Response (hold 1,5s) 095-099 Medium Dimmer Response (hold 1,5s) 100-104 Halogen (Slow) Dimmer Response (hold 1,5s) P. 38 English Version | NEO- BLINDER ARRAY FC...
  • Page 39 No function 225-229 LED Mode - Illumination (hold 1,5s) 230-234 LED Mode - Boost (hold 1,5s) 235-239 No function 240-244 Factory Reset (hold 3s) 245-249 User Reset (hold 3s) 250-255 No function P. 39 English Version | NEO-BLINDER ARRAY FC...
  • Page 40 Dimmer 1 000-255 0-100% Dimmer 1 Fine 000-255 0-100% Red 1 000-255 0-100% Red Fine1 000-255 0-100% Green 1 000-255 0-100% Green Fine1 000-255 0-100% Blue1 000-255 0-100% Blue Fine1 000-255 0-100% P. 40 English Version | NEO- BLINDER ARRAY FC...
  • Page 41 No function fade (Transition 006-105 0,1s - 10s (0,1s steps) Time between Color Macros) 106-214 11s - 119s (1s steps) 215-244 2m - 4m50s (10s steps) 245-255 5m - 15m (1m steps) P. 41 English Version | NEO-BLINDER ARRAY FC...
  • Page 42 Exponential Dimmer Curve (hold 1,5s) 075-079 Logarithmic Dimmer Curve (hold 1,5s) 080-084 S-Curve Dimmer Curve (hold 1,5s) 085-089 No function 090-094 LED (Fast) Dimmer Response (hold 1,5s) 095-099 Medium Dimmer Response (hold 1,5s) P. 42 English Version | NEO- BLINDER ARRAY FC...
  • Page 43 Shutter channel is set to DMX 250 245-249 User Reset (hold 3s) Reset only starts if Shutter channel is set to DMX 250 / no self test by DMX 250-255 No function P. 43 English Version | NEO-BLINDER ARRAY FC...
  • Page 44 Strobe 5: random opening pulse (fast slow) 145-149 Shutter open 150-164 Strobe 6: random closing pulse (fast slow) 165-169 Shutter open 170-184 Strobe 7: burst pulse (fast slow) 185-189 Shutter open P. 44 English Version | NEO- BLINDER ARRAY FC...
  • Page 45 000-005 No function (Transition Time between- Color Macros) 006-105 0,1s - 10s (0,1s steps) 106-214 11s - 119s (1s steps) 215-244 2m - 4m50s (10s steps) 245-255 5m - 15m (1m steps) P. 45 English Version | NEO-BLINDER ARRAY FC...
  • Page 46 LED Frequency 2000Hz (hold 3s) 155-159 LED Frequency 3600Hz (hold 3s) 160-164 LED Frequency 12KHz (hold 3s) 165-169 LED Frequency 25KHz (hold 3s) 170-174 No function 175-179 Fan Auto (hold 3s) P. 46 English Version | NEO- BLINDER ARRAY FC...
  • Page 47 Shutter channel is set to DMX 250 245-249 User Reset (hold 3s) Reset only starts if Shutter channel is set to DMX 250 / no self test by DMX 250-255 No function P. 47 English Version | NEO-BLINDER ARRAY FC...
  • Page 48 0-100% Amber 1 000-255 0-100% White 1 000-255 0-100% Dimmer2 000-255 0-100% Red 2 000-255 0-100% Green 2 000-255 0-100% Blue2 000-255 0-100% Amber 2 000-255 0-100% White 2 000-255 0-100% P. 48 English Version | NEO- BLINDER ARRAY FC...
  • Page 49 CCT Calibration (RAW Colors / hold 3s) 135-139 No function 140-144 LED Frequency 800Hz (hold 3s) 145-149 LED Frequency 1200Hz (hold 3s) 150-154 LED Frequency 2000Hz (hold 3s) 155-159 LED Frequency 3600Hz (hold 3s) P. 49 English Version | NEO-BLINDER ARRAY FC...
  • Page 50 Shutter channel is set to DMX 250 245-249 User Reset (hold 3s) Reset only starts if Shutter channel is set to DMX 250 / no self test by DMX 250-255 No function P. 50 English Version | NEO- BLINDER ARRAY FC...
  • Page 51 CTC 1 (affects RGBAW 1) 000-255 0-100% 000-004 5600K 005-182 2000K-6500K linear in 20-21K steps (please see detai- led CTC chart) 182-182 5600K 226-226 6500K 227-255 6621K-10.000K linear in 120-121K steps (please see detailed CTC chart) P. 51 English Version | NEO-BLINDER ARRAY FC...
  • Page 52 No function (Transition Time between- Color Macros 2) 006-105 0,1s - 10s (0,1s steps) 106-214 11s - 119s (1s steps) 215-244 2m - 4m50s (10s steps) 245-255 5m - 15m (1m steps) P. 52 English Version | NEO- BLINDER ARRAY FC...
  • Page 53 Halogen (Slow) Dimmer Response (hold 1,5s) 105-109 No function 110-114 Redshift On (hold 1,5s / affects only bet ween 2700-3500K 115-119 Redshift Off (hold 1,5s) 120-124 No function 125-129 Full Calibration (Colors & CCT / hold 3s) P. 53 English Version | NEO-BLINDER ARRAY FC...
  • Page 54 Shutter channel is set to DMX 250 245-249 User Reset (hold 3s) Reset only starts if Shutter channel is set to DMX 250 / no self test by DMX 250-255 No function P. 54 English Version | NEO- BLINDER ARRAY FC...
  • Page 55 Green 1 000-255 0-100% Green Fine1 000-255 0-100% Blue1 000-255 0-100% Blue Fine1 000-255 0-100% Amber 1 000-255 0-100% Amber Fine 1 000-255 0-100% White 1 000-255 0-100% White Fine 1 000-255 0-100% P. 55 English Version | NEO-BLINDER ARRAY FC...
  • Page 56 CTC 2 (affects RGBAW 2) 000-004 5600K 005-182 2000K-6500K linear in 20-21K steps (please see detai- led CTC chart) 182-182 5600K 226-226 6500K 227-255 6621K-10.000K linear in 120-121K steps (please see detailed CTC chart) P. 56 English Version | NEO- BLINDER ARRAY FC...
  • Page 57 No Function - Current Preset from Menu Settings 064-127 LED / fast 128-191 Medium 192-255 Halogen / slow Redshift 000-084 No Function - Current Preset from Menu Settings 085-170 Redshift Off 171-255 Redshift On P. 57 English Version | NEO-BLINDER ARRAY FC...
  • Page 58 LED Frequency 12KHz (hold 3s) 165-169 LED Frequency 25KHz (hold 3s) 170-174 No function 175-179 Fan Auto (hold 3s) 180-184 Fan Silent (hold 3s) 185-189 Fan Off (hold 3s) 190-194 Fan High Power (hold 3s) P. 58 English Version | NEO- BLINDER ARRAY FC...

  • Page 59: Maintenance

    When cleaning, wipe carefully with a soft cloth and general glass cleaning products. It is recommended Clean at least every 20 days. Do not use organic solvents such as alcohol to wipe the lamp shell to avoid damage P. 59 English Version | NEO-BLINDER ARRAY FC...

  • Page 60: General Troubleshooting

    The whole lamp does not Wait for the lamp body to cool down before tur- Switching power supply over-tempera- work when powered on ning it on ture protection does not work P. 60 English Version | NEO- BLINDER ARRAY FC...
  • Page 61 32 units constant power 220W Maximum power 610W Power Factor 0.95/230V working environment -20-45 °C Structural parameters SIZE SIZE: 400*200*192.5mm WEIGHT NET WEIGHT: 8.9 kg Protection level IP65 P. 61 English Version | NEO-BLINDER ARRAY FC...
  • Page 62 DISPLAY OLED display with 4 touch buttons Refresh frequency 800Hz/1200Hz/2000Hz/3600Hz/12000Hz/25000Hz Dimming delay LED/Medium/Halogen Dimming curve selection Linear /Exponential/Logarithmic/S-Curve Accessories Standard configuration European standard waterproof power cord 1PCS; instruc- tion manual 1PCS P. 62 English Version | NEO- BLINDER ARRAY FC...

  • Page 63: Dimensional Drawing

    DIMENSIONAL DRAWING P. 63 English Version | NEO-BLINDER ARRAY FC...
  • Page 64 P. 64 Versión Español | Tecshow NEBULA PAR 162 II...

Table of Contents